Bevel brushes crimped shank-mounted

Mounted Flared Cup Brush 3" Dia. .014 Carbon Steel 1/4" Shank

Item number:: 79182863
EAN:: 4007220517932

Technical data

PFERD Worldwide

Technical information

Mounted Flared Cup Brush 3" Dia. .014 Carbon Steel 1/4" Shank

Dia. external: 3 Inch
Dia. external: 70 mm
Dia. filament material: .014 Inch
Dia. filament material: 0.35 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 82863
Filament material: Steel wire (ST)
Max. RPM: 20000 RPM
Mounting system: Shank
Overall length: 1-3/4
Overall length: 45 mm
Packaging: Industrial packaging
RPM, optimum, from: 10000 RPM
RPM, optimum, to: 15000 RPM
Trim length: 7/8 Inch
Trim length: 22 mm
Width: 3/8 Inch
Width: 10 mm
Packaging unit: 10 pieces

Description

Excellent for medium-duty brushing such as deburring, cleaning, and derusting.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire is temperature-resistant up to 600°F.

Advantages

Ideal for cleaning narrow or hard-to-reach areas such as grooves, fillets, and inside edges.
Highly flexible, enabling optimal adaptation to the workpiece contour.
Long service life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Bevel brushes crimped shank-mounted

Mounted Flared Cup Brush 3" Dia. .014 Carbon Steel 1/4" Shank

PFERD Newsletter subscription