Legal notice Data protection Career

BW 10 SE 11 DIN 15/G28

Item number:
86100714
EAN:
4007220431825
Copy of es_MX: Eje flexible BW 10 SE 11 DIN 15/G28, incl. empuñadura 18.000-750 r.p.m. 1
Copy of es_MX: Eje flexible BW 10 SE 11 DIN 15/G28, incl. empuñadura 18.000-750 r.p.m. 1
Technical data
Login / Register
PFERD Worldwide
Technical information
Dia. drive-side coupling
1.575 Inch
Dia. drive-side coupling
40
Dia. drive-side coupling
40 mm
Dia. external
0.866
Dia. external
22 mm
Drive-side coupling, DIN
15
Handpiece-side coupling G
28
Handpiece-side coupling dia.
1.1 Inch
Handpiece-side coupling dia.
28
Handpiece-side coupling dia.
28 mm
Height
0.866 Inch
Height
22 mm
Length
66.299
Length
1684 mm
Net weight
2.713 kg
PFERD type
BW 10 SE 11 DIN 15/G28
Rotational speed range, from
750 RPM
Rotational speed range, to
18000 RPM
Width
0.866 Inch
Width
22 mm
Packaging unit
1 piece
Description

Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).

The flexible core is made of four to ten layers of wire, conforming to DIN 2076, and is specially designed for high-speed clockwise rotation. The coupling is securely press-fitted to the core. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. The flexible casing consists of oil-resistant rubber with a flat steel spiral interior and a solid rubber exterior. The connection couplings are pressed on firmly and encased in a rubber sheath as reinforcement. The handpieces are light and easy to handle and cover a wide rotational speed range. Because of low noise emissions, continuous operation with little fatigue is possible. Replaceable collets or the special shank mounting for morse cones allow various products to be mounted. The sliding coupling enables quick handpiece changes.

Flexible shaft including handpiece HA 10 G28.
Recommendations for use
  • The rotational speed and power output must stay within their specified ranges.
  • It is not possible to repair cores and flexible casings. We recommend replacement with pre-assembled new parts.
  • When using flexible shafts, please ensure that the shafts are not bent beyond the specified radius of curvature. The smallest possible radius of curvature is given for each flexible shaft.
  • The radius of curvature should not be smaller than 170 mm.
Ordering notes
  • Special lengths available on request.
  • Cores and hoses with double-sided sliding coupling on request.
Downloads
See more
Scroll to top

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.