Legal notice Data protection Career

BW 6 DIN10/G16

Flexible shaft BW 6 DIN10/G16 25,000-11,000 RPM

BW 6 DIN10/G16
Item number:
86210051
EAN:
4007220422663
Flexible shaft BW 6 DIN10/G16 25,000-11,000 RPM 1
Flexible shaft BW 6 DIN10/G16 25,000-11,000 RPM 1
Technical data
Login / Register
PFERD Worldwide
Technical information
Flexible shaft BW 6 DIN10/G16 25,000-11,000 RPM
Dia. drive-side coupling
1.18 Inch
Dia. drive-side coupling
30
Dia. drive-side coupling
30 mm
Dia. external
0,63 Inch
Dia. external
16 mm
Drive-side coupling, DIN
10
Handpiece-side coupling G
16
Handpiece-side coupling dia.
0.63 Inch
Handpiece-side coupling dia.
16
Handpiece-side coupling dia.
16 mm
Height
0.63 Inch
Height
16 mm
Length
64.96 Inch
Length
1650 mm
Net weight
1.19 kg
PFERD TOOLS type
BW 6 DIN10/G16
Rotational speed range
11.000 - 25.000 RPM
Width
0.63 Inch
Width
16 mm
Packaging unit
1 piece
Description

Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).

The flexible core is made of four to ten layers of wire, conforming to DIN 2076, and is specially designed for high-speed clockwise rotation. The coupling is securely press-fitted to the core. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. The flexible casing consists of oil-resistant rubber with a flat steel spiral interior and a solid rubber exterior. The connection couplings are pressed on firmly and encased in a rubber sheath as reinforcement. The handpieces are light and easy to handle and cover a wide rotational speed range. Because of low noise emissions, continuous operation with little fatigue is possible. Replaceable collets or the special shank mounting for morse cones allow various products to be mounted. The sliding coupling enables quick handpiece changes.
Recommendations for use
  • The rotational speed and power output must stay within their specified ranges.
  • It is not possible to repair cores and flexible casings. We recommend replacement with pre-assembled new parts.
  • When using flexible shafts, please ensure that the shafts are not bent beyond the specified radius of curvature. The smallest possible radius of curvature is given for each flexible shaft.
  • The radius of curvature should not be smaller than 140 mm.
Ordering notes
  • Special lengths available on request.
  • Cores and hoses with double-sided sliding coupling on request.
Downloads
tm25-catalog-9-web-en-us.pdf
See more
Scroll to top

PFERD TOOLS Newsletter subscription

Register here free of charge for our PFERD TOOLS newsletter and receive all the latest news on products, services and promotions from the world of PFERD TOOLS on a regular basis.