COMBICLICK® non-woven surface conditioning, hard discs

COMBICLICK hard non-woven disc CC dia. 100 mm A240F for fine grinding and finishing with an angle grinder

CC-VRH 100 A 240 F

Item number:: 42000030
EAN:: 4007220948125

COMBICLICK hard non-woven disc CC dia. 100 mm A240F for fine grinding and finishing with an angle grinder 1

COMBICLICK hard non-woven disc CC dia. 100 mm A240F for fine grinding and finishing with an angle grinder 2

COMBICLICK hard non-woven disc CC dia. 100 mm A240F for fine grinding and finishing with an angle grinder 3

COMBICLICK hard non-woven disc CC dia. 100 mm A240F for fine grinding and finishing with an angle grinder Youtube

Technical data Change variant

PFERD TOOLS worldwide

Choose options

Dia. external

4 Inch 4-1/2 Inch 5 Inch

Grit size

100 G 180 M 240 F

Packaging unit

Reset Filter

Matching accessories & spare parts

Backing pad CC-GT 100 M10

Technical information

COMBICLICK hard non-woven disc CC dia. 100 mm A240F for fine grinding and finishing with an angle grinder

Abrasive: Aluminum oxide A
Dia. external: 4 Inch
Dia. external: 100 mm
Grit size: 240 F
Max. RPM: 12000 RPM
RPM, optimum: 3800 RPM
Version: fine, blue
Packaging unit: 10 pieces

Description

The COMBICLICK® system consists of a specially developed backing pad and a rugged mounting system at the back of the disc. The backing pad allows COMBICLICK® discs to be used on most available angle grinders. The special geometry of the cooling slots ensures high air throughput, which considerably reduces the thermal load on the abrasive material and the workpiece. The quick-mounting system, rugged fixture, secure attachment of the disc and optimized cooling system help to provide up to 30% lower workpiece temperature, up to 25% increased stock removal, up to 30% longer disc life and improved utilization of the abrasive.

Designed for universal work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation, and light deburring work. Achieve matte and satin-finished surfaces.

Advantages

Innovative quick-mounting system guarantees convenient handling and cool grinding
Extremely quick and easy disc changes reduce process costs.
With COMBICLICK®, scratches caused by protruding clamping parts are prevented and very high utilization of the available abrasive is attained.
Low wear due to high tear strength.
The open structure of the non-woven material prevents loading.

Recommendations for use

Use COMBICLICK® non-woven discs with COMBICLICK® backing pads on variable speed angle grinders.
For the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
Adding oil or water during grinding results in a finer finish, cooler grinding, and longer service life.

Ordering notes

Please order COMBICLICK® backing pads separately.

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminum; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams

Drive types: Angle grinder; Cordless angle grinder; Drive spindle

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends COMBICLICK® for long, fatigue-free and resource-saving work in the shortest possible time. The patented quick-mounting system reduces disc changes and setup times.