COMBIDISC felt discs CD/CDR

COMBIDISC® Felt Disc, 2" Dia, Type CD, Polishing

Item number:: 42770050
EAN:: 4007220440490

COMBIDISC® Felt Disc, 2" Dia, Type CD, Polishing 2

COMBIDISC® Felt Disc, 2" Dia, Type CD, Polishing 3

COMBIDISC® Felt Disc, 2" Dia, Type CD, Polishing 4

COMBIDISC® Felt Disc, 2" Dia, Type CD, Polishing 5

COMBIDISC® Felt Disc, 2" Dia, Type CD, Polishing Youtube

Technical data Change variant

PFERD Worldwide

Choose options

Clamping system

CDR system CD system

Dia. external

2 Inch

Reset Filter

Matching accessories & spare parts

Polishing paste DPP 3-20

Polishing paste G-PP 1 VP STEELOX

Polishing paste G-PP 2 VP ALU

Polishing paste G-PP 4 HGP UNIVERSAL

Polishing paste G-PP 5 HGP PLAST

Technical information

COMBIDISC® Felt Disc, 2" Dia, Type CD, Polishing

Clamping system: CD system
Dia. external: 2 Inch
Dia. external: 50 mm
EDP no.: 43215
RPM, optimum, from: 2000 RPM
RPM, optimum, to: 4000 RPM
Packaging unit: 10 pieces

Description

Designed for polishing with polishing paste bars, grinding pastes, or diamond polishing pastes in face-down grinding on small and medium-sized surfaces.

The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.

Advantages

Reduced down time due to quick changes.
Convenient to use due to simple handling and low-vibration working.
No operational disruptions caused by sticking, slipping, or disengaging.

Recommendations for use

Use COMBIDISC® felt discs with a abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
When applying a different polishing paste, use a new unused felt disc.
For the best performance, use with a recommended peripheral speed of 1,000-2,000 SFPM. This provides an ideal compromise between polishing performance, thermal load on the workpiece and tool wear.

Ordering notes

Please order arbor separately.

Safety notes

The maximum permitted peripheral speed is 9,800 SFPM.

Materials that can be worked: Aluminum; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc