COMBIDISC non-woven discs VRW CD/CDR

COMBIDISC soft non-woven disc CD dia. 38 mm A100 for cleaning and satin finishing

CD VRW 38 A 100

Item number:: 47201079
EAN:: 4007220537039

COMBIDISC soft non-woven disc CD dia. 38 mm A100 for cleaning and satin finishing 1

COMBIDISC soft non-woven disc CD dia. 38 mm A100 for cleaning and satin finishing 2

COMBIDISC soft non-woven disc CD dia. 38 mm A100 for cleaning and satin finishing 3

COMBIDISC soft non-woven disc CD dia. 38 mm A100 for cleaning and satin finishing 4

COMBIDISC soft non-woven disc CD dia. 38 mm A100 for cleaning and satin finishing Youtube

Technical data Change variant

PFERD TOOLS worldwide

Choose options

Clamping system

CDR system CD system

Dia. external

1-1/2 Inch 2 Inch 3 Inch

Grit size

100 180 280

Reset Filter

Matching accessories & spare parts

Shank-mounted holder SBH 38 H

Shank-mounted holder SBH 38 M

Shank-mounted holder SBH 38 W

Technical information

COMBIDISC soft non-woven disc CD dia. 38 mm A100 for cleaning and satin finishing

Abrasive: Aluminum oxide A
Clamping system: CD system
Dia. external: 1-1/2 Inch
Dia. external: 38 mm
Grit size: 100
RPM, optimum: 7.000 - 10.000 RPM
Version: medium
Packaging unit: 50 pieces

Description

Designed for very fine grinding on small and medium-sized surfaces and contours, and for cleaning metal and painted surfaces. Achieve matte and satin-finished surfaces. Highly open structure.

The CD clamping system has a threaded connection with female thread (metal/plastic). Also compatible with the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.

Advantages

Reduced down time due to quick changes.
Convenient to use due to simple handling and low-vibration working.
No operational disruptions caused by sticking, slipping, or disengaging.

Recommendations for use

Use COMBIDISC® non-woven discs with abrasive disc holders on flexible shaft drives with angle handpieces, or small compressed-air or electric angle grinders.
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Adding oil or water during grinding results in a finer finish, cooler grinding, and longer service life.

Ordering notes

Please order the COMBIDISC® backing pad separately.

Safety notes

The maximum permitted peripheral speed is 9,800 SFPM.

Materials that can be worked: Aluminum; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work; Work on weld seams