Conical diamond files, width 4 mm

conical diamond file 4x170mm D46 (fine) for particularly narrow, deep-set contours

Item number:: 15917040
EAN:: 4007220070635

conical diamond file 4x170mm D46 (fine) for particularly narrow, deep-set contours 2

conical diamond file 4x170mm D46 (fine) for particularly narrow, deep-set contours 3

conical diamond file 4x170mm D46 (fine) for particularly narrow, deep-set contours 4

Technical data Change variant

PFERD Worldwide

Technical information

conical diamond file 4x170mm D46 (fine) for particularly narrow, deep-set contours

Grit size: D 46
Height, point: 1/64 Inch
Height, point: 0.5 mm
Height, tang: 5/64 Inch
Height, tang: 2 mm
Length, coating: 2 Inch
Length, coating: 50 mm
Overall length: 6-11/16
Overall length: 170 mm
Width: 5/32 Inch
Width: 4 mm
Packaging unit: 1 piece

Description

Diamond files and sheets are used when conventional files fail due to the hardness of the workpiece material.

Diamond files and sheets are also used for processing hardened steel. Using these products does not generate much heat, which prevents chemical wear. This allows for a longer service life for the high hardness diamond grain.

Conical diamond files are used in tool-making for particularly narrow, deep-set contours. The forged shank allows for use without an additional handle.

Recommendations for use

Only apply light pressure to the file, especially when using on workpiece edges.
Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often, knocking the file against a hard object is sufficient.
Avoid using grease.

Ordering notes

Customer-specific made-to-order solutions are available on request.

Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide

Applications: Deburring; Finishing; Leveling; Removing oxide layers; Surface work; Working on edges; Working on edges (chamfering, rounding)

Drive types: Manual application

Downloads

Conical diamond files, width 4 mm

conical diamond file 4x170mm D46 (fine) for particularly narrow, deep-set contours

PFERD Newsletter subscription