Legal notice Data protection Career

Core SE 7 PST-T DIN10/M5

Flexible shaft 4/7 PST-T, replaceable core, M5 fastening thread end

Item number:
87101805
EAN:
4007220432389
Flexible shaft 4/7 PST-T, replaceable core, M5 fastening thread end 1
Flexible shaft 4/7 PST-T, replaceable core, M5 fastening thread end 1
Technical data
Login / Register
PFERD Worldwide
Technical information
Flexible shaft 4/7 PST-T, replaceable core, M5 fastening thread end
Dia. drive-side coupling
M10
Dia. drive-side coupling
M10
Dia. external
0.28
Dia. external
7 mm
Dia. thread
M5
Dia. tool mounting
0,2 Inch
Dia. tool mounting
5 mm
Drive-side coupling, DIN
10
EDP no.
94556
Height
0.28 Inch
Height
7 mm
Length
79.9
Length
2031 mm
Net weight
0.447 kg
PFERD type
SE 7 PST-T DIN 10/M5 2 m
Rotational speed range, from
1500 RPM
Rotational speed range, to
4250 RPM
Width
0.28 Inch
Width
7 mm
Packaging unit
1 piece
Description

These special flexible shafts do not have a handpiece for mounting and are particularly flexible in the front section. The POLISTAR-TUBE grinding tools are attached directly to the core of the flexible shaft with screws (INOX type). POLINOX® cross buffs PNST are screwed on with adapter AD M4 or AD M5 (accessories). This combination is highly suitable for gradual fine grinding and cleaning of inner surfaces of pipes and pipe bends. Both pipe bend ends can be deburred from the entry side.

The PST-T flexible shaft is designed for grinding the insides of pipes.
Recommendations for use
  • Flexible shaft motors with stepless rotational speed regulation are recommended as tool drives.
  • Before inserting the POLISTAR-TUBE and shaft into the pipe, preform and adjust to fit the pipe diameter.
  • Reduce the rotational speed of the product during insertion.
  • For pipes with more than three bends, it is best to grind from both ends if possible.
  • When the product emerges from the pipe end, it can be pulled back while still in rotation. The rear of the POLISTAR-TUBE deburrs the pipe end and also grinds the inside of the pipe during the backward movement.
  • All flexible shaft drives a speed range of 7,650–1,500 RPM and flexible shaft connection DIN 10 can be used.
Ordering notes
  • Special lengths available on request.
Safety notes
  • Observe the recommended and maximum permitted rotational speeds of the products for the rotational speed setting of the motor.
Downloads
See more
Scroll to top

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.