Cup brushes crimped shank-mounted

Cup brush crimped TBU dia. 30 mm shank dia. 6 mm steel wire dia. 0.20

Item number:: 43209701
EAN:: 4007220004517

Cup brush crimped TBU dia. 30 mm shank dia. 6 mm steel wire dia. 0.20 2

Cup brush crimped TBU dia. 30 mm shank dia. 6 mm steel wire dia. 0.20 3

Technical data

PFERD Worldwide

Technical information

Cup brush crimped TBU dia. 30 mm shank dia. 6 mm steel wire dia. 0.20

Dia. external: 1-1/4 Inch
Dia. external: 30 mm
Dia. filament material: .008 Inch
Dia. filament material: 0.2 mm
Dia. shank: 6 mm
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Max. RPM: 10500 RPM
Mounting system: Shank
Overall length: 2-3/8 Inch
Overall length: 60 mm
RPM, optimum, from: 5300 RPM
RPM, optimum, to: 7900 RPM
Trim length: 19/32 Inch
Trim length: 15 mm
Width: 3/8 Inch
Width: 10 mm
Packaging unit: 10 pieces

Description

Designed for cleaning, derusting and smoothing. Perfect tool for the removal of corrosion and paint. Ideal for brushing on large, flat and easily accessible surfaces with the entire brush face applied to the workpiece.

Cup brush with plastic-covered brush body.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire is temperature-resistant up to 600°F.

Advantages

Highly flexible, enabling optimal adaptation to the workpiece contour.
Long service life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Drive types: Drive spindle; Flexible shaft drive; Power drill; Straight grinder

Downloads

Cup brushes crimped shank-mounted

Cup brush crimped TBU dia. 30 mm shank dia. 6 mm steel wire dia. 0.20

PFERD Newsletter subscription