Cup brushes crimped with thread

Crimped Wire Cup Brush 3-1/2" Dia. .014 Stainless Steel 5/8-11" Thread

Item number:: 79182359
EAN:: 4007220041642

Technical data

PFERD Worldwide

Technical information

Crimped Wire Cup Brush 3-1/2" Dia. .014 Stainless Steel 5/8-11" Thread

Dia. external: 3-1/2 Inch
Dia. external: 90 mm
Dia. filament material: .014 Inch
Dia. filament material: 0.35 mm
Dia. thread: 5/8-11
EDP no.: 82359
Filament material: Stainless steel wire (INOX)
Grit size: -
Max. RPM: 12500 RPM
Mounting system: Thread
Packaging: Industrial packaging
RPM, optimum, from: 5000 RPM
RPM, optimum, to: 12500 RPM
Trim length: 7/8 Inch
Trim length: 22 mm
Packaging unit: 1 piece

Description

Excellent for medium-duty brushing such as deburring, cleaning, and derusting of large surfaces.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Advantages

Highly flexible, enabling optimal adaptation to the workpiece contour.
Very corrosion-resistant.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use on variable speed angle grinders.

Materials that can be worked: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Drive types: Angle grinder; Cordless angle grinder

Downloads

Cup brushes crimped with thread

Crimped Wire Cup Brush 3-1/2" Dia. .014 Stainless Steel 5/8-11" Thread

PFERD Newsletter subscription