Diamond escapement files three square

diamond escapement file three square 140mm D46 (fine) for small geometries on hard materials

DF 3614 D 46

Item number:: 15314140
EAN:: 4007220323656

diamond escapement file three square 140mm D46 (fine) for small geometries on hard materials 1

Technical data Change variant

PFERD TOOLS worldwide

Technical information

diamond escapement file three square 140mm D46 (fine) for small geometries on hard materials

Grit size: D 46
Length, coating: 1-9/16 Inch
Length, coating: 40 mm
Overall length: 5-1/2 Inch
Overall length: 140 mm
Shape: Three square
Width: 1/8 Inch
Width: 3 mm
Packaging unit: 1 piece

Description

Diamond files and sheets are used when conventional files fail due to the hardness of the workpiece material.

Diamond files and sheets are also used for processing hardened steel. Using these products does not generate much heat, which prevents chemical wear. This allows for a longer service life for the high hardness diamond grain.

Diamond escapement files are used on very small shapes in tool making and precision mechanics. Their forged shanks allow them to be used without an additional handle.

Grit size D 46 creates ultra-fine surface qualities.

Recommendations for use

Only apply light pressure to the file, especially when using on workpiece edges.
Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often, knocking the file against a hard object is sufficient.
Avoid using grease.

Ordering notes

Customer-specific made-to-order solutions are available on request.

Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide