Diamond grinding discs CC-GRIND® SOLID DIAMOND

CC-GRIND-SOLID DIAMOND 125x22.23 mm D852 (very coarse) for work on hard materials

CC-GRIND-SOLID-DIAMOND 125-22,23 D 852

Item number:: 36612585
EAN:: 4007220068380

CC-GRIND-SOLID DIAMOND 125x22.23 mm D852 (very coarse) for work on hard materials 1

CC-GRIND-SOLID DIAMOND 125x22.23 mm D852 (very coarse) for work on hard materials 2

CC-GRIND-SOLID DIAMOND 125x22.23 mm D852 (very coarse) for work on hard materials 3

CC-GRIND-SOLID DIAMOND 125x22.23 mm D852 (very coarse) for work on hard materials 4

CC-GRIND-SOLID DIAMOND 125x22.23 mm D852 (very coarse) for work on hard materials 5

Technical data Change variant

PFERD TOOLS worldwide

Choose options

Dia. external

4-1/2 Inch 5 Inch

Grit size

D 427 D 852

Reset Filter

Matching accessories & spare parts

Clamping flange for CC-GRIND grinding discs SFS CC-GRIND 115/125 5/8"

Technical information

CC-GRIND-SOLID DIAMOND 125x22.23 mm D852 (very coarse) for work on hard materials

Abrasive: Diamond
Dia. external: 5 Inch
Dia. external: 125 mm
Dia. hole: 7/8 Inch
Dia. hole: 22.23 mm
Grit size: D 852
Max. RPM: 12200 RPM
Packaging unit: 1 piece

Description

The CC-GRIND®-SOLID-DIAMOND has been specially developed for applications on hard materials which cannot be machined with conventional tools made of aluminum oxide or silicon carbide.

The CC-GRIND®-SOLID-DIAMOND is used for both wet and dry grinding.

Recommendations for use

Only use the face of the disc, not suitable for peripheral grinding (on edge).
To extend the service life of the grinding disc on scale and wear-resistant coatings, reduce the cutting speed of the speed-adjustable angle grinder to 30 to 40 m/s.
For the best results, use with the CC-GRIND®-SOLID/FLEX clamping flange set.
When used on angle grinders with a 5/8-11 thread, the matching clamping flange set must be ordered separately.

Ordering notes

Customer-specific made-to-order solutions are available on request.

Contents

Matching clamping flange set (M14 thread) is included.

Materials that can be worked: Grey/nodular cast iron (GG/GJL, GGG/GJS); Nickel or titanium-based superalloys; Scale; Technical ceramics; Tungsten carbide; Wear-resistant coatings (powder metal alloys and hardfacing alloys)

Applications: Deburring; Descaling; Grinding out; Leveling; Removing oxide layers; Roughening; Rounding; Surface work; Trimming; Working on edges; Working on edges (chamfering, rounding); Work on weld seams

Drive types: Angle grinder; Drive spindle; Robot; Stationary machines

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends the CC-GRIND®-SOLID-DIAMOND diamond grinding disc for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.