Diamond handy files half-round

Diamond handy file half-round 215 mm D181 (coarse) for hard materials

Item number:: 15431203
EAN:: 4007220535462

Diamond handy file half-round 215 mm D181 (coarse) for hard materials 2

Technical data Change variant

PFERD Worldwide

Technical information

Diamond handy file half-round 215 mm D181 (coarse) for hard materials

Grit size: D 181
Height: 9/64 Inch
Height: 3.8 mm
Length, coating: 4 Inch
Length, coating: 100 mm
Overall length: 8-1/2
Overall length: 215 mm
Shape: Half-round
Width: 1/2 Inch
Width: 12.5 mm
Packaging unit: 1 piece

Description

Diamond files and sheets are used when conventional files fail due to the hardness of the workpiece material.

Diamond files and sheets are also used for processing hardened steel. Using these products does not generate much heat, which prevents chemical wear. This allows for a longer service life for the high hardness diamond grain.

Diamond handy files have a forged shank which allows for use without an additional handle.

Recommendations for use

Only apply light pressure to the file, especially when using on workpiece edges.
Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often, knocking the file against a hard object is sufficient.
Avoid using grease.

Ordering notes

Customer-specific made-to-order solutions are available on request.

Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide