End brushes crimped coated head, shank-mounted

Crimped Wire End Brush 3/4" Dia. .006 Stainless Steel 1/4" Shank

Item number:: 79183053
EAN:: 4007220964613

Crimped Wire End Brush 3/4" Dia. .006 Stainless Steel 1/4" Shank 2

Crimped Wire End Brush 3/4" Dia. .006 Stainless Steel 1/4" Shank 3

Technical data

PFERD Worldwide

Technical information

Crimped Wire End Brush 3/4" Dia. .006 Stainless Steel 1/4" Shank

Dia. cup: 1 Inch
Dia. cup: 22 mm
Dia. external: 3/4 Inch
Dia. external: 22 mm
Dia. filament material: .006 Inch
Dia. filament material: 0.15 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 83053
Filament material: Stainless steel wire (INOX)
Max. RPM: 22000 RPM
Mounting system: Shank
Overall length: 2-5/8
Overall length: 67 mm
Packaging: Industrial packaging
RPM, optimum, from: 8500 RPM
RPM, optimum, to: 14000 RPM
Trim length: 1 Inch
Trim length: 25 mm
Packaging unit: 10 pieces

Description

Designed for light brushing such as deburring, cleaning and derusting.

End brush with plastic-covered brush body.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Advantages

Optimal access to hard-to-reach areas, such as drilled holes and crevices, as the filament spreads out upon rotation.
The plastic covering prevents the risk of corrosion.
Very corrosion-resistant.
Creates fine surfaces.
The brush is degreased and does not leave any oil residue on the workpiece.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Materials that can be worked: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

End brushes crimped coated head, shank-mounted

Crimped Wire End Brush 3/4" Dia. .006 Stainless Steel 1/4" Shank

PFERD Newsletter subscription