End brushes knotted, SINGLETWIST, shank-mounted

SINGLETWIST® Knot End Brush 1/4" Dia. Flared Cup .014 Carbon Steel 1/4" Shank

Item number:: 79183108
EAN:: 4007220964392

SINGLETWIST® Knot End Brush 1/4" Dia. Flared Cup .014 Carbon Steel 1/4" Shank 2

SINGLETWIST® Knot End Brush 1/4" Dia. Flared Cup .014 Carbon Steel 1/4" Shank 3

SINGLETWIST® Knot End Brush 1/4" Dia. Flared Cup .014 Carbon Steel 1/4" Shank Youtube

Technical data

PFERD Worldwide

Technical information

SINGLETWIST® Knot End Brush 1/4" Dia. Flared Cup .014 Carbon Steel 1/4" Shank

Dia. cup: 3/8 Inch
Dia. cup: 10 mm
Dia. external: 1/4 Inch
Dia. external: 10 mm
Dia. filament material: .014 Inch
Dia. filament material: 0.35 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 83108
Filament material: Steel wire (ST)
Max. RPM: 20000 RPM
Mounting system: Shank
Number, knots: 1
Overall length: 2-13/16
Overall length: 71 mm
Packaging: Industrial packaging
RPM, optimum, from: 2500 RPM
RPM, optimum, to: 10000 RPM
Trim length: 1-1/8 Inch
Trim length: 28 mm
Packaging unit: 1 piece

Description

Innovative and flexible single-knot brush for special applications.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire is temperature-resistant up to 600°F.

Advantages

Optimal access to hard-to-reach areas such as inside corners, as the knot is less likely to unravel.
Long service life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use on variable speed angle grinders.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

End brushes knotted, SINGLETWIST, shank-mounted

SINGLETWIST® Knot End Brush 1/4" Dia. Flared Cup .014 Carbon Steel 1/4" Shank

PFERD Newsletter subscription