Legal notice Data protection Career

Extensions for drive spindles SPVH9 L1000-3 S6

extension for drive spindles SPV 100-1/4 S3/8 Max. RPM 25,000 incl. 1/4" collet"

Item number:
87101504
EAN:
4007220101926
extension for drive spindles SPV 100-1/4 S3/8 Max. RPM 25,000 incl. 1/4" collet" 1
extension for drive spindles SPV 100-1/4 S3/8 Max. RPM 25,000 incl. 1/4" collet" 1
Technical data
Login / Register
PFERD Worldwide
Technical information
extension for drive spindles SPV 100-1/4 S3/8 Max. RPM 25,000 incl. 1/4" collet"
Collet group
2
Dia. shank holder
0.24 Inch
Dia. shank holder
6
Dia. spindle, max.
0.35
Dia. spindle, max.
9 mm
Dia. tool mounting
0.12 Inch
Dia. tool mounting
3 mm
Incl. dia collet
0.12
Incl. dia collet
3
Length, mounting pin
28 mm
Max. RPM
25000 RPM
Net weight
0.64 kg
Overall length
43.54
Overall length
1106 mm
Packaging unit
1 piece
Description

Drive spindle extensions allow shanks of grinding and milling tools to be extended. They allow access to hard-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.

Drive spindle extensions allow shanks of grinding and milling tools to be extended. They allow access to hard-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.

Extension for drive spindles for manual application with a diameter of 9 mm, a length of 1000 mm, a tool mounting of 3 mm and a shank holder of 6 mm.
Advantages
  • Cost-effective alternative to custom order burs and mounted points.
Ordering notes
  • Special lengths are available on request.
Safety notes
  • The maximum permitted rotational speed is 25,000 RPM.
  • Caution! When using spindle extensions, please observe the valid safety regulations and accident prevention regulations. Please do not clamp products which are too large on the extension since they are driven by a core. The extension and machine must be guided in a line. Levering and tilting result in damage to the extension.
  • When working with extended shank lengths, insert the product into the workpiece (e.g. bores, pipes, ducts or keyways) before turning the power tool on. The extension is only intended for manual use with suitable air grinders, electric grinders or flexible shaft handpieces for tools with standard shanks. The extension and a product permitted for use at the appropriate rotational speed are clamped into an impact-free collet on the device. Do not clamp on the transition radius. Clamping of a second extension or of products with excessively long shanks is not permitted.
Contents
  • 2 keys DM SW 6/7 mm and 1 collet 3 mm.
Downloads
See more
Scroll to top

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.