Legal notice Data protection Career

Flexible shaft BW 10 replacement casing SCH 10 DIN10/G28 2M

Flexible shaft BW 10 replacement casing SCH 10 DIN10/G28 2M

Item number:
86200631
EAN:
4007220420928
Flexible shaft BW 10 replacement casing SCH 10 DIN10/G28 2M 1
Flexible shaft BW 10 replacement casing SCH 10 DIN10/G28 2M 1
Technical data
Login / Register
PFERD Worldwide
Technical information
Flexible shaft BW 10 replacement casing SCH 10 DIN10/G28 2M
Dia. drive-side coupling
1.18 Inch
Dia. drive-side coupling
30
Dia. drive-side coupling
30 mm
Dia. external
7/8
Dia. external
22 mm
Drive-side coupling, DIN
10
EDP no.
94533
Handpiece-side coupling G
28
Handpiece-side coupling dia.
1.1 Inch
Handpiece-side coupling dia.
28
Handpiece-side coupling dia.
28 mm
Height
0.87 Inch
Height
22 mm
Length
81
Length
2053 mm
Net weight
1.58 kg
PFERD type
SCH 10 DIN10/G28 2M
Width
0.87 Inch
Width
22 mm
Packaging unit
1 piece
Description

Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).

The flexible core is made of four to ten layers of wire, conforming to DIN 2076, and is specially designed for high-speed clockwise rotation. The coupling is securely press-fitted to the core. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. The flexible casing consists of oil-resistant rubber with a flat steel spiral interior and a solid rubber exterior. The connection couplings are pressed on firmly and encased in a rubber sheath as reinforcement. The handpieces are light and easy to handle and cover a wide rotational speed range. Because of low noise emissions, continuous operation with little fatigue is possible. Replaceable collets or the special shank mounting for morse cones allow various products to be mounted. The sliding coupling enables quick handpiece changes.
Recommendations for use
  • The rotational speed and power output must stay within their specified ranges.
  • It is not possible to repair cores and flexible casings. We recommend replacement with pre-assembled new parts.
  • When using flexible shafts, please ensure that the shafts are not bent beyond the specified radius of curvature. The smallest possible radius of curvature is given for each flexible shaft.
Ordering notes
  • Special lengths available on request.
  • Cores and hoses with double-sided sliding coupling on request.
Downloads
See more
Scroll to top

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.