High-performance tungsten carbide bur set, MICRO cut

Carbide Bur Set 3 Piece MICRO Cut 1/8" Shank Plastic Case

1303 MICRO

Item number:: 21901303
EAN:: 4007220226667

Carbide Bur Set 3 Piece MICRO Cut 1/8" Shank Plastic Case 1

Carbide Bur Set 3 Piece MICRO Cut 1/8" Shank Plastic Case 2

Carbide Bur Set 3 Piece MICRO Cut 1/8" Shank Plastic Case 3

Carbide Bur Set 3 Piece MICRO Cut 1/8" Shank Plastic Case 4

Carbide Bur Set 3 Piece MICRO Cut 1/8" Shank Plastic Case Youtube

Technical data Change variant

PFERD TOOLS worldwide

This set contains

Tungsten carbide high-performance burr MICRO cylindrical ZYA dia. 03x13 mm shank dia. 3 mm finishing

Item number: 21201273

EAN: 4007220895535
Tungsten carbide high-performance burr MICRO cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm finishing

Item number: 21205173

EAN: 4007220869000
Tungsten carbide high-performance burr MICRO tree shape with radius end RBF dia. 03x13 mm shank dia. 3 mm finishing

Item number: 21218173

EAN: 4007220955352

Technical information

Carbide Bur Set 3 Piece MICRO Cut 1/8" Shank Plastic Case

Contents shank diameter: 3
Cut: MICRO
Dia. shank: 0,118 Inch
Dia. shank: 3 mm
Number, content: 3 pcs.
PFERD TOOLS type: 1303 MICRO 3TLG
Packaging unit: 1 piece

Description

MICRO cut tungsten carbide burs are specifically designed for finishing and are used in areas where mounted points are often used. They offer a higher stock removal rate and produce a high surface quality, particularly when compared to conventional double cut burs. MICRO cut burs also operate with low vibration and little noise, they maintain their geometry over their entire service life, and they work in both manual and machine applications. MICRO cut burs can machine almost all materials up to a hardness of 940 HV (68 HRC).

This MICRO cut bur set contains three tungsten carbide burs for finishing work. These burs are the most common shapes and dimensions. The sturdy plastic box protects the burs from dirt and damage.

Special features

High surface quality.
In comparison to abrasive mounted points, there is no change in geometry due to wear and tear.
Work on almost all materials up to 940 HV (68 HRC).
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Ideal for finishing, very fine cleaning work, corrections in tool and mold construction, and for sharpening cutting tools.
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centers; Drive spindle; Flexible shaft drive; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGTS 1/1000 RS PGTS 1/1000 RS

High-performance tungsten carbide bur set, MICRO cut

Carbide Bur Set 3 Piece MICRO Cut 1/8" Shank Plastic Case

1303 MICRO

This set contains

Matching tool drive

PFERD TOOLS Newsletter subscription