High-performance tungsten carbide bur set, MICRO cut

Item number:: 21727551
EAN:: 4007220490594

Copy of es_MX: Set de fresas de metal duro de alto rendimiento 27551 MICRO, 3 piezas, Ø 9,52 mm, mango Ø 6,35 mm, mecanizado fino 1

Copy of es_MX: Set de fresas de metal duro de alto rendimiento 27551 MICRO, 3 piezas, Ø 9,52 mm, mango Ø 6,35 mm, mecanizado fino 2

Copy of es_MX: Set de fresas de metal duro de alto rendimiento 27551 MICRO, 3 piezas, Ø 9,52 mm, mango Ø 6,35 mm, mecanizado fino 3

Copy of es_MX: Set de fresas de metal duro de alto rendimiento 27551 MICRO, 3 piezas, Ø 9,52 mm, mango Ø 6,35 mm, mecanizado fino Youtube

Technical data Change variant

PFERD TOOLS worldwide

Choose options

Dia. shank

1/4 Inch 1/8 Inch 6 mm

PFERD TOOLS type

1303 MICRO 1306 MICRO 1312 MICRO 1502 MICRO Set 27551 MICRO

Reset Filter

This set contains

Carbide Bur SA-3 Cylindrical Uncut End MICRO Cut 3/8" x 3/4" x 1/4" Shank

Item number: 21727516

EAN: 4007220850213
Carbide Bur SF-3 Tree Shape MICRO Cut 3/8" x 3/4" x 1/4" Shank

Item number: 21727532

EAN: 4007220850244
Carbide Bur SC-3 Cylindrical Radius End MICRO Cut 3/8" x 3/4" x 1/4" Shank

Item number: 21727542

EAN: 4007220017807

Technical information

Cut: MICRO
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 27551
PFERD TOOLS type: Set 27551 MICRO
Packaging unit: 1 piece

Description

MICRO cut tungsten carbide burs are specifically designed for finishing and are used in areas where mounted points are often used. They offer a higher stock removal rate and produce a high surface quality, particularly when compared to conventional double cut burs. MICRO cut burs also operate with low vibration and little noise, they maintain their geometry over their entire service life, and they work in both manual and machine applications. MICRO cut burs can machine almost all materials up to a hardness of 940 HV (68 HRC).

Advantages

High surface quality.
In comparison to abrasive mounted points, there is no change in geometry due to wear and tear.
Work on almost all materials up to 940 HV (68 HRC).
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Ideal for finishing, very fine cleaning work, corrections in tool and mold construction, and for sharpening cutting tools.
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends MICRO cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERD TOOLS ERGONOMICS

recommends MICRO cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

High-performance tungsten carbide bur set, MICRO cut

This set contains

PFERD TOOLS EFFICIENCY

PFERD TOOLS ERGONOMICS

PFERD TOOLS Newsletter subscription