High-performance tungsten carbide bur set, MICRO cut

Tungsten carbide small high-performance burr set MICRO 3-piece dia. 12mm shank dia. 6mm finishing

1312 MICRO

Item number:: 21901312
EAN:: 4007220226681

Tungsten carbide small high-performance burr set MICRO 3-piece dia. 12mm shank dia. 6mm finishing 1

Tungsten carbide small high-performance burr set MICRO 3-piece dia. 12mm shank dia. 6mm finishing 2

Tungsten carbide small high-performance burr set MICRO 3-piece dia. 12mm shank dia. 6mm finishing 3

Tungsten carbide small high-performance burr set MICRO 3-piece dia. 12mm shank dia. 6mm finishing 4

Tungsten carbide small high-performance burr set MICRO 3-piece dia. 12mm shank dia. 6mm finishing Youtube

Technical data Change variant

PFERD Worldwide

Choose options

Dia. shank

1/4 Inch 1/8 Inch 6 mm

PFERD TOOLS type

1303 MICRO 1306 MICRO 1312 MICRO 1502 MICRO Set 27551 MICRO

Reset Filter

This set contains

Tungsten carbide high-performance burr MICRO cylindrical ZYAS end dia. 12x25mm shank dia. 6mm finishing

Item number: 21100576

EAN: 4007220953105
Tungsten carbide high-performance burr MICRO cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm finishing

Item number: 21105376

EAN: 4007220953136
Tungsten carbide high-performance burr MICRO tree shape with radius end RBF dia. 12x25 mm shank dia. 6 mm finishing

Item number: 21117876

EAN: 4007220953143

Technical information

Tungsten carbide small high-performance burr set MICRO 3-piece dia. 12mm shank dia. 6mm finishing

Cut: MICRO
Dia. shank: 6 mm
Dia. shank: 6 mm
PFERD TOOLS type: 1312 MICRO
Packaging unit: 1 piece

Description

MICRO cut tungsten carbide burs are specifically designed for finishing and are used in areas where mounted points are often used. They offer a higher stock removal rate and produce a high surface quality, particularly when compared to conventional double cut burs. MICRO cut burs also operate with low vibration and little noise, they maintain their geometry over their entire service life, and they work in both manual and machine applications. MICRO cut burs can machine almost all materials up to a hardness of 940 HV (68 HRC).

This MICRO cut bur set contains three tungsten carbide burs for finishing work. These burs are the most common shapes and dimensions. The sturdy plastic box protects the burs from dirt and damage.

Advantages

High surface quality.
In comparison to abrasive mounted points, there is no change in geometry due to wear and tear.
Work on almost all materials up to 940 HV (68 HRC).
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Ideal for finishing, very fine cleaning work, corrections in tool and mold construction, and for sharpening cutting tools.
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERD TOOLS EFFICIENCY recommends MICRO cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERD TOOLS ERGONOMICS recommends MICRO cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/220 RS PGAS 4/220 RS

High-performance tungsten carbide bur set, MICRO cut

Tungsten carbide small high-performance burr set MICRO 3-piece dia. 12mm shank dia. 6mm finishing

1312 MICRO

This set contains

Matching tool drive

PFERD TOOLS Newsletter subscription