High-performance tungsten carbide bur set, OMNI HC-FEP double cut

tungsten carbide high-performance burr set ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse

Item number:: 21901415
EAN:: 4007220226711

tungsten carbide high-performance burr set ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse 2

tungsten carbide high-performance burr set ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse 3

tungsten carbide high-performance burr set ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse 4

Technical data

PFERD Worldwide

This set contains

Tungsten carbide high-performance burr ALLROUND cylindrical ZYAS end dia. 12x25mm shank dia. 6mm HICOAT steel

Item number: 21001044

EAN: 4007220221860
Tungsten carbide high-performance burr ALLROUND cylindrical with radius end WRC dia. 12x25mm shank dia. 6mm HICOAT universal

Item number: 21001048

EAN: 4007220221945
Tungsten carbide high-performance burr ALLROUND tree shape with radius end RBF dia. 12x25mm shank dia. 6mm HICOAT universal

Item number: 21001056

EAN: 4007220222065

Technical information

tungsten carbide high-performance burr set ALLROUND HC-FEP 3-piece shank dia. 6 mm universal coarse

Cut: OMNI HC-FEP
Dia. shank: 6 mm
Dia. shank: 6 mm
PFERD type: 1414 ALLROUND HC-FEP
Packaging unit: 1 piece

Description

This OMNI cut HC-FEP bur set contains three versatile tungsten carbide burs with high-quality HICOAT® coating for use on materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals, and cast iron. These burs are the most common shapes and dimensions. The sturdy plastic box protects the burs from dirt and damage.

Advantages

High hardness and wear resistance.
Effective chip removal due to improved anti-adhesion properties.
Very high temperature-resistance.
Increased service life.
Can be used at higher peripheral speeds than uncoated burs on the same material.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.

Safety notes

Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.

Materials that can be worked: Case-hardened steels; Cast steel; Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Tool steels