High-performance tungsten carbide bur set, STEEL cut

Tungsten carbide high-performance burr set 1807 STEEL 3-piece dia. 12mm shank dia. 6 mm for steel

Item number:: 21901807
EAN:: 4007220431528

Tungsten carbide high-performance burr set 1807 STEEL 3-piece dia. 12mm shank dia. 6 mm for steel 2

Tungsten carbide high-performance burr set 1807 STEEL 3-piece dia. 12mm shank dia. 6 mm for steel 3

Tungsten carbide high-performance burr set 1807 STEEL 3-piece dia. 12mm shank dia. 6 mm for steel 4

Tungsten carbide high-performance burr set 1807 STEEL 3-piece dia. 12mm shank dia. 6 mm for steel Youtube

Technical data Change variant

PFERD Worldwide

Choose options

Dia. shank

6 mm

PFERD type

1806 STEEL 1807 STEEL 1812 STEEL

Reset Filter

Technical information

Tungsten carbide high-performance burr set 1807 STEEL 3-piece dia. 12mm shank dia. 6 mm for steel

Cut: STEEL
Dia. shank: 6 mm
Dia. shank: 6 mm
PFERD type: 1807 STEEL
Packaging unit: 1 piece

Description

This STEEL cut bur set contains three tungsten carbide burs for processing steel and cast steel. These burs are the most common shapes and dimensions. The sturdy plastic box protects the burs from dirt and damage.

Advantages

Up to 50% higher stock removal rate on steel and cast steel in comparison to conventional double cut burs.
Significantly increased aggressiveness, creates large chips, and has very good chip removal due to its innovative tooth design.
Workpieces are protected due to significantly lower thermal load.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.

Safety notes

Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.

Materials that can be worked: Case-hardened steels; Cast iron; Cast steel; Hardened, heat-treated steels over 370 HV (38 HRC); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends STEEL cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERDERGONOMICS

recommends STEEL cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

High-performance tungsten carbide bur set, STEEL cut

Tungsten carbide high-performance burr set 1807 STEEL 3-piece dia. 12mm shank dia. 6 mm for steel

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription