High-performance tungsten carbide burs, CAST cut, Cone bur with pointed end – Shape M

Tungsten carbide high-performance burr CAST conical pointed SKM dia. 12x25 mm shank dia. 6 mm for cast iron

Item number:: 21115283
EAN:: 4007220952481

Tungsten carbide high-performance burr CAST conical pointed SKM dia. 12x25 mm shank dia. 6 mm for cast iron 2

Tungsten carbide high-performance burr CAST conical pointed SKM dia. 12x25 mm shank dia. 6 mm for cast iron Youtube

Technical data

PFERD Worldwide

Technical information

Tungsten carbide high-performance burr CAST conical pointed SKM dia. 12x25 mm shank dia. 6 mm for cast iron

Angle: 26 °
Cut: CAST
Dia. external: 0,472 Inch
Dia. external: 12 mm
Dia. shank: 0,236 Inch
Dia. shank: 6 mm
Length, cut: 0,984 Inch
Length, cut: 25 mm
Overall length: 2,559 Inch
Overall length: 65 mm
RPM from, grey cast iron, white cast iron: 12000 RPM
RPM to, grey cast iron, white cast iron: 20000 RPM
RPM, grey cast iron, white cast iron: 12.000 - 20.000 RPM
Packaging unit: 1 piece

Description

With the CAST cut, PFERD has developed innovative burs specifically for work on cast iron. These burs achieve incredibly high stock removal on cast iron and operate with significantly reduced vibration and noise.

Cone bur with pointed end, shape M.

Advantages

Up to 100% higher stock removal rate on cast iron than conventional double cut burs, due to an innovative tooth design.
Significantly increased aggressiveness, creates large chips, and has very good chip removal.
Comfortable to use due to reduced vibration and less noise.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Safety notes

Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Cast iron; Grey/nodular cast iron (GG/GJL, GGG/GJS); White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends CAST cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERDERGONOMICS

recommends CAST cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/220 RS PGAS 4/220 RS

High-performance tungsten carbide burs, CAST cut, Cone bur with pointed end – Shape M

Tungsten carbide high-performance burr CAST conical pointed SKM dia. 12x25 mm shank dia. 6 mm for cast iron

PFERDEFFICIENCY

PFERDERGONOMICS

Matching tool drive

PFERD Newsletter subscription