High-performance tungsten carbide burs, EDGE cut, Conical counterbore - 1/8 radius

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges

V 1612/6 EDGE R3,0 ECS

Item number:: 21152946
EAN:: 4007220098028

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges 1

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges 2

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges 3

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges Youtube

Technical data Change variant

PFERD TOOLS worldwide

Choose options

Dia. external

5/8 Inch

Length, construction

1/2 Inch 5/16 Inch

PFERD TOOLS type

V 1612/6 EDGE R3,0 V 1612/6 EDGE R3,0 ECS

Reset Filter

Matching accessories & spare parts

High-performance tungsten carbide burs, EDGE cut, Conical counterbore - 1/8 radius V 1612/6 EDGE R3,0

Technical information

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges

Cut: EDGE
Dia. ball bearing: 0.394 Inch
Dia. ball bearing: 10 mm
Dia. external: 5/8 Inch
Dia. external: 16 mm
Dia. shank: 0.236 Inch
Dia. shank: 6 mm
Dia. sleeve: 1 Inch
Dia. sleeve: 25 mm
Length, construction: 5/16 Inch
Length, construction: 24 mm
Length, cut: 1/8 Inch
Length, cut: 3 mm
Overall length: 2-3/64 Inch
Overall length: 52 mm
PFERD TOOLS type: V 1612/6 EDGE R3,0 ECS
RPM, grey cast iron, white cast iron: 12000 - 18000 RPM
RPM, hard non-ferrous metals: 5000 - 7000 RPM
RPM, hardened, heat-treated steels over 370 HV (38 HRC): 12000 - 15000 RPM
RPM, high-temperature-resistant materials: 5000 - 9000 RPM
RPM, soft non-ferrous metals: 12000 - 18000 RPM
RPM, steels up to 370 HV (38 HRC): 12000 - 18000 RPM
Radius corner design: 0.118 Inch
Radius corner design: 3 mm
Packaging unit: 1 piece

Description

EDGE cut tungsten carbide burs have been specifically developed for precise work on edges. The special design allows the bur to run directly along edges without damaging the workpiece. Exact edges can be created in a single step - with either defined chamfers of 30° or 45°, or to a defined radius of 1/8". Rounding edges is a precautionary measure against corrosion according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).

Concave radius bur for producing precise rounded edges. Cannot be re-sharpened. Designed for producing and finishing edges with an 1/8" outer radius."

The EDGE Cutting System includes EDGE cut burs and a special guide sleeve that can be mounted into a conventional power tool collet to ensure optimal guidance during light deburring work.

Special features

Special design allows for precise handling.
Safe and comfortable use.
Exact edge shapes can be created in a single step.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Improved guidance.
Can be used with any conventional straight grinder.
Bur is interchangeable.

Recommendations for use

Use the burs counterrotationally for quick stock removal. For a fine surface finish, run the bur back over the edges in the same direction of rotation.
If possible, use burs with the EDGE cut with the PFERD TOOLS compressed-air straight grinder PG 3/210 with the matching guide sleeve EFH PG 3/210.
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.

Ordering notes

The EDGE Cutting System (ECS) bur can be reordered and replaced if required. Matching bur: EDP 25150.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Chamfering; Deburring; Milling; Rounding; Working on edges; Working on edges (chamfering, rounding)

Drive types: Automated centers; Straight grinder; Tool machine

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends EDGE cut burs for preventing fatigue, saving resources, and producing excellent work.

Downloads

High-performance tungsten carbide burs, EDGE cut, Conical counterbore - 1/8 radius

Tungsten carbide concave radius burr EDGE V ECS dia. 16x12 mm shank dia. 6 mm work on edges

V 1612/6 EDGE R3,0 ECS

Matching accessories & spare parts

PFERD TOOLS EFFICIENCY

PFERD TOOLS Newsletter subscription