High-performance tungsten carbide burs, EDGE cut, Conical counterbore - Shape K

Tungsten carbide burr EDGE conical counterbore KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges

KSK 1603/6 EDGE 45°

Item number:: 21115466
EAN:: 4007220952436

Tungsten carbide burr EDGE conical counterbore KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges 1

Tungsten carbide burr EDGE conical counterbore KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges 2

Tungsten carbide burr EDGE conical counterbore KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges Youtube

Technical data Change variant

PFERD Worldwide

Choose options

Cut

EDGE EDGE ALU

Dia. external

5/8 Inch

Length, cut

1/8 Inch 1/32 Inch

Reset Filter

Technical information

Tungsten carbide burr EDGE conical counterbore KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges

Angle: 90 °
Cut: EDGE
Dia. ball bearing: 3/8 Inch
Dia. ball bearing: 10 mm
Dia. external: 5/8 Inch
Dia. external: 16 mm
Dia. shank: 0,236 Inch
Dia. shank: 6 mm
Length, construction: 1/2 Inch
Length, construction: 12 mm
Length, cut: 1/8 Inch
Length, cut: 3 mm
Overall length: 2-3/64 Inch
Overall length: 52 mm
RPM, grey cast iron, white cast iron: 12.000 - 18.000 RPM
RPM, hardened, heat-treated steels over 370 HV (38 HRC): 12.000 - 15.000 RPM
RPM, harte NE-Metalle: 5.000 - 7.000 RPM
RPM, high-temperature-resistant materials: 5.000 - 9.000 RPM
RPM, soft non-ferrous metals: 12.000 - 18.000 RPM
RPM, steels up to 370 HV (38 HRC): 12.000 - 18.000 RPM
Packaging unit: 1 piece

Description

EDGE cut tungsten carbide burs have been specifically developed for precise work on edges. The special design allows the bur to run directly along edges without damaging the workpiece. Exact edges can be created in a single step - with either defined chamfers of 30° or 45°, or to a defined radius of 1/8". Rounding edges is a precautionary measure against corrosion according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).

Cone counterbore bur for producing precisely defined chamfers. Designed for counterboring and chamfering of defined 45° chamfer angles.

Advantages

Special design allows for precise handling.
Safe and comfortable use.
Exact edge shapes can be created in a single step.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Use the burs counterrotationally for quick stock removal. For a fine surface finish, run the bur back over the edges in the same direction of rotation.
If possible, use burs with the EDGE cut with the PFERD TOOLS compressed-air straight grinder PG 3/210 with the matching guide sleeve EFH PG 3/210.
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Chamfering; Deburring; Milling; Rounding; Working on edges; Working on edges (chamfering, rounding)

Drive types: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERD TOOLS EFFICIENCY recommends EDGE cut burs for preventing fatigue, saving resources, and producing excellent work.

Downloads

High-performance tungsten carbide burs, EDGE cut, Conical counterbore - Shape K

Tungsten carbide burr EDGE conical counterbore KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges

KSK 1603/6 EDGE 45°

PFERD TOOLS Newsletter subscription