High-performance tungsten carbide burs, STEEL cut, Tree bur with radius end – Shape F

Tungsten carbide high-performance burr STEEL oval TRE dia. 08x13 mm shank dia. 6 mm for steel

Item number:: 21135087
EAN:: 4007220092637

Tungsten carbide high-performance burr STEEL oval TRE dia. 08x13 mm shank dia. 6 mm for steel Youtube

Technical data

PFERD Worldwide

Technical information

Tungsten carbide high-performance burr STEEL oval TRE dia. 08x13 mm shank dia. 6 mm for steel

Cut: STEEL
Dia. external: 0.315 Inch
Dia. external: 8 mm
Dia. shank: 0.236 Inch
Dia. shank: 6 mm
Length, cut: 0.512 Inch
Length, cut: 13 mm
Overall length: 2.086 Inch
Overall length: 53 mm
RPM from, hardened, heat-treated steels over 370 HV (38 HRC): 18000 RPM
RPM from, steels up to 370 HV (38 HRC): 18000 RPM
RPM to, hardened, heat-treated steels over 370 HV (38 HRC): 30000 RPM
RPM to, steels up to 370 HV (38 HRC): 30000 RPM
Radius: 0.145 Inch
Radius: 3.7 mm
Packaging unit: 1 piece

Description

With the innovative STEEL cut, PFERD has developed unique burs for steel and cast steel. These burs feature significantly increased aggressiveness and easy control for safe and precise work. Due to their incredibly high stock removal rate, STEEL cut burs help users save considerable time and money.

Oval bur.

Advantages

Up to 50% higher stock removal rate on steel and cast steel in comparison to conventional double cut burs.
Significantly increased aggressiveness, creates large chips, and has very good chip removal due to its innovative tooth design.
Workpieces are protected due to significantly lower thermal load.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Safety notes

Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.

Materials that can be worked: Case-hardened steels; Cast steel; Hardened, heat-treated steels over 370 HV (38 HRC); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends STEEL cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERDERGONOMICS

recommends STEEL cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

High-performance tungsten carbide burs, STEEL cut, Tree bur with radius end – Shape F

Tungsten carbide high-performance burr STEEL oval TRE dia. 08x13 mm shank dia. 6 mm for steel

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription