High-performance tungsten carbide burs, TOUGH-S cut, Cylindrical bur with radius end - Shape C

Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant

WRC 1225/6 TOUGH-S

Item number:: 21000038
EAN:: 4007220770139

Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant 1

Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant 2

Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant Youtube

Technical data

PFERD Worldwide

Matching accessories & spare parts

Handpieces for RCK system

Technical information

Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant

Cut: TOUGH-S
Dia. external: 0,472 Inch
Dia. external: 12 mm
Dia. shank: 0,236 Inch
Dia. shank: 6 mm
Length, cut: 0,984 Inch
Length, cut: 25 mm
Overall length: 2,559 Inch
Overall length: 65 mm
RPM, grey cast iron, white cast iron: 7.000 - 16.000 RPM
RPM, hardened, heat-treated steels over 370 HV (38 HRC): 7.000 - 9.000 RPM
RPM, steels up to 370 HV (38 HRC): 7.000 - 16.000 RPM
Packaging unit: 1 piece

Description

The TOUGH-S cut has been specially designed for tough operating conditions in shipyards, foundries and steel construction. It is also ideal for all manufacturing sectors where, due to the difficult production environment, frequent tooth breakages and other damage to conventional burs occur. TOUGH-S cut carbide burs feature smooth milling and high stock removal.

Cylindrical bur with rounded radius end, shape C.

Advantages

The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Observe the recommended rotational speed.
The TOUGH-S cut can be used on materials up to 580 HV (54 HRC). For hard materials, it is recommended to test the bur on the same material before using on the actual workpiece.
TOUGH-S cut carbide burs are also designed for high-impact applications when using shank extensions, for applications with a high surface contact angle, for work on narrow contours, and for applications where slower rotational speeds are used.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/220 RS PGAS 4/220 RS

Pneumatic straight grinder PGAS 4/120 E-HV PGAS 4/120 E-HV

High-performance tungsten carbide burs, TOUGH-S cut, Cylindrical bur with radius end - Shape C

Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant

WRC 1225/6 TOUGH-S

Matching accessories & spare parts

Matching tool drive

PFERD TOOLS Newsletter subscription