HSS hole saws thread version 1/2-20 UNF

7/8" Bi-Metal Hole Saw

Item number:: 25100322
EAN:: 4007220062340

Technical data Change variant

PFERD Worldwide

Matching accessories & spare parts

Hole saw arbors 25200111

Technical information

7/8" Bi-Metal Hole Saw

Cutting depth, max: 1-7/16 Inch
Cutting depth, max: 36 mm
Dia. external: 7/8 Inch
Dia. external: 22 mm
EDP no.: 29105
RPM from, rust and acid-resistant steels: 195 RPM
RPM from, soft non-ferrous metals: 520 RPM
RPM from, steels up to 370 HV (38 HRC): 390 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 640 RPM
Packaging unit: 1 piece

Description

Hole saws are made from tough, shatter-proof, sturdy HSS bi-metal. The saw teeth are made from high-quality M42 material. They are used for cutting out holes.

Arbors with a 1/2-20 thread are part numbers 29033 and 29036.

Advantages

Cost-effective sawing of round cut-outs.
Alternating tooth pitch prevents chattering during sawing.
High concentricity.
Good chip removal.
The hole saw is conveniently centered and guided via the replaceable bi-metal pilot drill.
Hole saw arbor comes with an ejection spring for improved ejection of the cut material.

Recommendations for use

Observe the recommended rotational speed.
Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 1/8" over the teeth of the hole saw."
When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminum, use kerosene instead of cutting oil.
Bi-metal hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles that develop from the workpiece during work. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing.
Avoid overheating the saw.
Observe the maximum cutting depth.

Ordering notes

Please order hole saw arbors separately.

Safety notes

When using shank extensions, the recommended hole saw rotational speed must not be exceeded in order to prevent accidents.

Materials that can be worked: Aluminum; Brass; Bronze; Chipboard; Copper; Hard non-ferrous metal; Hardwood; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Tough aluminium alloys; Wood; Zinc

Applications: Cutting out holes; Drilling

Drive types: Column drill; Power drill

Downloads

Included in

HSS hole saw set for craftsmen LS-SO 7 H

HSS hole saws thread version 1/2-20 UNF

7/8" Bi-Metal Hole Saw

Matching accessories & spare parts

Included in

PFERD Newsletter subscription