HSS rotary cutters, cut ALU, conical shape with radius end L

HSS rotary cutter ALU conical shape with radius end L dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous

Item number:
22451816
EAN:
4007220059616
Technical information
HSS rotary cutter ALU conical shape with radius end L dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous

Angle
14 °
Cut
ALU
Dia. external
0,63 Inch
Dia. external
16 mm
Dia. shank
0,236 Inch
Dia. shank
6 mm
Length, cut
1,181 Inch
Length, cut
30 mm
Overall length
2,756 Inch
Overall length
70 mm
RPM from, soft non-ferrous metals
4000 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %
4000 RPM
RPM to, soft non-ferrous metals
6000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %
6000 RPM
Radius
0,189 Inch
Radius
4.8 mm
Packaging unit
1 piece
Description

The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminum alloys, plastics, fiber-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.

14° Taper bur with radius end, shape L.

Advantages
  • Highly aggressive.
  • Can be used at low rotational speeds.
  • Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
  • The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Recommendations for use
  • Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
  • When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
  • In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
  • The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
Materials that can be worked
Aluminum
Brass
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
Plastics
Soft aluminium alloys
Thermoplastics
Zinc
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.