HSS step drill, HICOAT coating

Step drill HSS 13 drilling steps dia. 4-39 mm 3-surface shaft dia. 10 mm HICOAT coated

Item number:: 25201044
EAN:: 4007220166079

Step drill HSS 13 drilling steps dia. 4-39 mm 3-surface shaft dia. 10 mm HICOAT coated 2

Step drill HSS 13 drilling steps dia. 4-39 mm 3-surface shaft dia. 10 mm HICOAT coated 3

Technical data Change variant

PFERD Worldwide

Technical information

Step drill HSS 13 drilling steps dia. 4-39 mm 3-surface shaft dia. 10 mm HICOAT coated

Dia. shank: 10 mm
Dia. shank: 10 mm
Drill bit dia. range: 4 - 39 mm
Drilling range, from: 0,157 Inch
Drilling range, from: 4 mm
Drilling range, to: 1,535 Inch
Drilling range, to: 39 mm
Number, drill steps: 13 pcs.
Overall length: 4,212 Inch
Overall length: 107 mm
RPM from, rust and acid-resistant steels: 80 RPM
RPM from, soft non-ferrous metals: 160 RPM
RPM from, steels over 220 HV (95 HB): 80 RPM
RPM from, steels up to 220 HV (95 HB): 160 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 80 RPM
RPM to, rust and acid-resistant steels: 1600 RPM
RPM to, soft non-ferrous metals: 2400 RPM
RPM to, steels over 220 HV (95 HB): 1600 RPM
RPM to, steels up to 220 HV (95 HB): 2400 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 1600 RPM
RPM, grey cast iron, white cast iron: -
RPM, harte NE-Metalle: -
RPM, rust and acid-resistant steels: 80 - 1.600 RPM
RPM, soft non-ferrous metals: 160 - 2.400 RPM
RPM, steels over 220 HV (95 HB): 80 - 1.600 RPM
RPM, steels up to 220 HV (95 HB): 160 - 2.400 RPM
Version: HC-FEP
Ø Drill bit dia. range, Inch USA: 0,157 - 1,535Inch
Packaging unit: 1 piece

Description

HSS step drills for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft. HSS step drills with premium HICOAT® coating HC-FEP are wear resistant and versatile as they can be used to process steel, stainless steel (INOX), non-ferrous metals, thermoplastics and duroplastics. Step drills with HICOAT® coating HC-FEP provide good high-temperature hardness and resistance to oxidation. They can therefore also be used on hard materials without the addition of coolants.

Advantages

Drilling and deburring in a single step.
Completely smooth running and a high cutting performance.
The high-quality drill tip ensures easy centering and drilling.
The tool taper makes it easier to pull back from drilled plates.
Long and solid chips are quickly and easily removed similar to the chip produced by a spiral drill.
Built-up edges and cold welding on the blades are prevented.

Recommendations for use

Use HSS step drills on sheets, pipes and profiles with a maximum thickness of 4 mm.
Step drills with a HICOAT® coating can also be used without the addition of coolants.
Step drills with a HICOAT® coating are ideal for use on stainless steel (INOX).

Materials that can be worked: Aluminum; Brass; Bronze; Case-hardened steels; Cast steel; Chipboard; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Hard aluminium alloys; Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; Wood; Zinc

Applications: Countersinking; Deburring; Drilling

Drive types: Column drill; Power drill

Downloads

HSS step drill, HICOAT coating

Step drill HSS 13 drilling steps dia. 4-39 mm 3-surface shaft dia. 10 mm HICOAT coated

PFERD Newsletter subscription