Milling tools with ALUMASTER HICOAT cutting inserts, HSD-R design for radial applications

ALUMASTER High Speed Disc 4-1/2"/5" with HICOAT® Inserts

Item number:: 22000021
EAN:: 4007220107515

ALUMASTER High Speed Disc 4-1/2"/5" with HICOAT® Inserts 2

ALUMASTER High Speed Disc 4-1/2"/5" with HICOAT® Inserts 3

ALUMASTER High Speed Disc 4-1/2"/5" with HICOAT® Inserts 4

ALUMASTER High Speed Disc 4-1/2"/5" with HICOAT® Inserts Youtube

Technical data

PFERD Worldwide

Matching accessories & spare parts

ALUMASTER cutting insert set WSP-A-8R 115/125 ALUMASTER

ALUMASTER cutting insert set WSP-A-8R 115/125 ALUMASTER HICOAT

Service set ALUMASTER ASS-R8 115/125 ALUMASTER HICOAT

Torque wrench DSWK WIHA Torque 4,0

Spare blade for torque spanner TWK WIHA Torque T15

Cutting inserts bolt set WSP-S-M4S

Technical information

ALUMASTER High Speed Disc 4-1/2"/5" with HICOAT® Inserts

Dia. external: 4-1/2 Inch
Dia. external: 115 mm
Dia. hole: 7/8 Inch
Dia. hole: 22.23 mm
EDP no.: 20110
RPM to, soft non-ferrous metals: 13300 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 13000 RPM
RPM, soft non-ferrous metals: - 13.300 RPM
Width: 5/16 Inch
Width: 8 mm
Packaging unit: 1 piece

Description

The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminum as it does not generate hazardous or explosive dust. The ALUMASTER includes specially developed tungsten carbide cutting inserts fixed to the High Speed Disc.

Special disc for processing aluminum alloys using an angle grinder. Version with HICOAT® coating for processing particularly demanding materials. Also suited to peripheral milling and milling out root seams. HSD-R version for radial applications.

Advantages

Does not generate hazardous or explosive aluminum dust.
Does not require a dust extraction system.
Cost-effective and eco-friendly alternative to grinding wheels and flap discs of comparable weight.
Innovative and powerful milling tool designed for maximum safety, extreme durability, and ease of use.
Specially developed, turnable, and replaceable tungsten carbide cutting inserts.
Exceptionally high stock removal rate.
Extremely high degree of hardness, very low friction coefficient, very low tendency towards adhesion, improved surface quality, and reduced burr formation, all due to the HICOAT® coating

Recommendations for use

The ALUMASTER has been designed primarily for use on aluminum, wrought aluminum alloys, and cast aluminum. It can also machine non-ferrous metals that have a relatively low strength, and it can machine fiber-reinforced plastics. Check this for the specific application on a case-by-case basis.
Do not push the disc deep into a workpiece. The milling disc is not a cutting tool.
Do not exert unnecessarily high forces on the angle grinder. The ALUMASTER High Speed Disc already works with low forces.
When machining workpiece edges, cut along the edge, never across the edge.
Do not decelerate the disc while it is touching the workpiece. The cutting inserts may break.
HICOAT® coating allows for use on very complex materials like cast aluminum alloys with 5-10% silicon content, sticky and greasy materials, abrasive cast aluminum alloys with a silicon content over 15%, abrasive materials like fibre-reinforced plastics (FVK), and non-ferrous alloys that are stronger than aluminum (bronze, brass, etc.).

Safety notes

The flange nut must be tightened with the appropriate tool, such as a face pin wrench. Clamping systems which are designed to be tightened without the use of an additional tool, i.e. which are tightened by hand, should not be used.
Tighten the mounting bolts of the cutting inserts using a torque spanner with a tightening torque of 4 Nm. The part number for the 4 Nm torque spanner is 20135.
Loose cutting inserts may break during use. Regularly check to make sure they are attached securely.
Do not use damaged cutting inserts, they may break.

Contents

High Speed Disc ALUMASTER HSD-R 4-1/2"/5" HICOAT® including pre-mounted tungsten carbide cutting inserts, hexalobular socket key, and plastic box.

Materials that can be worked: Aluminum; Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Thermoplastics; Tough aluminium alloys; Zinc

Applications: Milling; Milling out; Root seam processing; Surface work; Work on fillet welds; Work on weld seams

Drive types: Angle grinder; Cordless angle grinder; Robot; Stationary machines

PFERDVALUE

PFERDEFFICIENCY

recommends the ALUMASTER HICOAT® High Speed Discs for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

PFERDERGONOMICS

recommends the ALUMASTER HICOAT® High Speed Discs as an innovative tool solution for work on aluminum as they do not generate hazardous or explosive dust.

Downloads

brochure-alumaster-high-speed-disc-2020-web-en-usa.pdf

Milling tools with ALUMASTER HICOAT cutting inserts, HSD-R design for radial applications

ALUMASTER High Speed Disc 4-1/2"/5" with HICOAT® Inserts

Matching accessories & spare parts

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription