Pneumatic angle grinder PWSA 4/200

compressed-air angle grinder PWSA 4/200 HV 20,000 RPM/300 watts

Item number:: 80700277
EAN:: 4007220598184

Technical data

PFERD Worldwide

Technical information

compressed-air angle grinder PWSA 4/200 HV 20,000 RPM/300 watts

Air consumption, at idle: 20.13 cfm
Air consumption, at idle: 0.57 cfm
Air consumption, under load: 14.83 cfm
Air consumption, under load: 0.42 cfm
Air supply hose internal dia.: 0,33 Inch
Air supply hose internal dia.: 8.5 mm
Collet group: 5
Exhaust direction: rear
Height: 2,72 Inch
Height: 69 mm
Incl. dia collet: 6 mm
Length: 5,91
Length: 150 mm
Net weight: 0.52 kg
Noise/sound pressure level: 74 db(A)
Number of oil drops [min]: 3 drops
Operating pressure: 6.3 bar
Power HP: 0.4 HP
Power output: 300 Watts
Rotational speed: 20000 RPM
Throttle type: Lever
Width: 1,46 Inch
Width: 37 mm
Packaging unit: 1 piece

Description

The drive is equipped with a collet mounting for mounted products.

The exhaust air flow of the air grinder is at the back.

The powerful driver has a low angle head height and is suitable for single-hand use. The air grinder has to be used with oil. Due to the lever valve, the drive has a dead man's switch.

Advantages

No dust turbulence on the workpiece side.
The machine has a low angle head height and is excellent for narrow work areas.
Good size/weight to output ratio.
Safe working using dead man's switch.

Safety notes

The drive must be operated with the specified number of oil droplets to prevent premature malfunctioning.

Downloads

Pneumatic angle grinder PWSA 4/200

compressed-air angle grinder PWSA 4/200 HV 20,000 RPM/300 watts

PFERD Newsletter subscription