diamond polishing paste DPP grit size 3µ very fine syringe containing 20g for hard material

Technical information

Colour code: green
Contents: 20 g
Grit size: 3
Suitable for use on: Very hard materials
Packaging unit: 1 piece

Description

Diamond polishing pastes allow for quick and efficient work, particularly in tool and die making.

Diamond polishing pastes are used for work on hard materials, such as tungsten carbide and hardened steels. They are used in combination with felt polishing elements. Diamond polishing pastes can be diluted and dissolved with water and alcohol.

Grit size according to ISO 6344 = P 5000

Advantages

High productivity.
Quick results.
Specialized selection of grit sizes.

Recommendations for use

When using diamond polishing pastes, use the most coarse paste first.
If extensive surface improvements are needed, use several grit sizes one after another, each finer than the previous, cleaning well between pastes.
When changing grit size, make sure that a new, clean polishing product (e.g. felt point or felt wheel) is used.

Ordering notes

The grit sizes are specified in µm.

Materials that can be worked: Aluminum; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys

Applications: Polishing

Drive types: Manual application

Downloads

Polishing paste

diamond polishing paste DPP grit size 3µ very fine syringe containing 20g for hard material

PFERD Newsletter subscription