TC hole cutter deep version 60 mm, shank dia. 12 mm

Tungsten carbide hole cutter/hole saw dia. 60x60 mm shank dia. 12 mm cutting depth 57 mm universal

Item number:: 25466035
EAN:: 4007220063866

Tungsten carbide hole cutter/hole saw dia. 60x60 mm shank dia. 12 mm cutting depth 57 mm universal 2

Technical data

PFERD Worldwide

Matching accessories & spare parts

Pilot drill for TC hole cutters LOSB 8/94

Technical information

Tungsten carbide hole cutter/hole saw dia. 60x60 mm shank dia. 12 mm cutting depth 57 mm universal

Dia. external: 2-23/64 Inch
Dia. external: 60 mm
Dia. shank: 0,427 Inch
Dia. shank: 12 mm
RPM, rust and acid-resistant steels: 105 - 265 RPM
RPM, soft non-ferrous metals: 230 - 350 RPM
RPM, steels up to 370 HV (38 HRC): 210 - 320 RPM
Packaging unit: 1 piece

Description

Tungsten carbide hole cutters are professional tools for quick, precise hole-cutting (cut-outs) with a diameter of 16 to 105 mm. They are suitable for working on alloyed and non-alloyed steels, stainless steel (INOX), non-ferrous metals and plastics (including GRP). Tungsten carbide hole cutters are used on hand drills or on stationary machines. PFERD hole cutters have an irregular tooth pitch (distance between teeth) to prevent tool chatter.

The deep version (tool height 60 mm) is suitable for use on curved surfaces and pipe materials. The maximum cutting depth is 57 mm.

Advantages

High concentricity, as the cutting head and shank are one solid piece.
Optimum cutting performance due to sharp teeth made of high-quality tungsten carbide.
Quick-mounting system bi-metal hole saw drill.

Recommendations for use

The recommended rotational speeds specified apply to machines capable of providing roughly constant rotational speed under load. For low-power machines where speeds drop sharply under load, the rotational speed can be increased by about 30%. If the teeth of the cutter are not continuously engaged (e.g. on pipes or curved surfaces), the recommended rotational speed levels may be increased by up to 100%. This will help to prevent chatter and tooth breakage when using the cutter in manual applications.
Tungsten carbide hole cutters are suitable for work on stainless steel (INOX).
To avoid corrosion, remove any particles which develop during work from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
PFERD tungsten carbide hole cutters can be resharpened. Timely and professional resharpening substantially lengthens the tool life. Please contact your local sharpening service.
The 2-3/8" diameter is designed for cutting out 2-3/8" holes for built-in lights.

Ordering notes

Tungsten carbide hole cutters come with a pilot drill.

Materials that can be worked: Aluminum; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Chipboard; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Cutting out holes; Drilling

Drive types: Column drill; Power drill; Robot; Stationary machines

Downloads

TC hole cutter deep version 60 mm, shank dia. 12 mm

Tungsten carbide hole cutter/hole saw dia. 60x60 mm shank dia. 12 mm cutting depth 57 mm universal

Matching accessories & spare parts

PFERD Newsletter subscription