Tungsten carbide burrs for general use, cut 5, conical shape with radius end KEL

Tungsten carbide burr tree shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z5 universal fine

Item number:: 21125256
EAN:: 4007220048689

Tungsten carbide burr tree shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z5 universal fine 2

Technical data

PFERD Worldwide

Technical information

Tungsten carbide burr tree shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z5 universal fine

Angle: 14 °
Cut: 5
Dia. external: 0,472 Inch
Dia. external: 12 mm
Dia. shank: 0,236 Inch
Dia. shank: 6 mm
Length, cut: 1,181 Inch
Length, cut: 30 mm
Overall length: 2,756 Inch
Overall length: 70 mm
RPM from, hard non-ferrous metals: 9000 RPM
RPM from, hardened, heat-treated steels over 370 HV (38 HRC): 9000 RPM
RPM from, high-temperature-resistant materials: 9000 RPM
RPM from, rust and acid-resistant steels: 9000 RPM
RPM from, steels up to 370 HV (38 HRC): 12000 RPM
RPM to, hard non-ferrous metals: 12000 RPM
RPM to, hardened, heat-treated steels over 370 HV (38 HRC): 12000 RPM
RPM to, high-temperature-resistant materials: 16000 RPM
RPM to, rust and acid-resistant steels: 12000 RPM
RPM to, steels up to 370 HV (38 HRC): 16000 RPM
Radius: 0,12 Inch
Radius: 2.6 mm
Packaging unit: 1 piece

Description

Cut 5 is designed for fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.

Universal line burs are designed for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

14° Taper bur with round radius end, shape L.

Advantages

Good stock removal rate due to high quality tungsten carbide, bur shape, cut, and optional coating.
Durable.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
High surface quality.

Recommendations for use

The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Materials that can be worked: Bronze; Case-hardened steels; Cast steel; Cobalt-based alloys; Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/220 RS PGAS 4/220 RS

Tungsten carbide burrs for general use, cut 5, conical shape with radius end KEL

Tungsten carbide burr tree shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z5 universal fine

Matching tool drive

PFERD Newsletter subscription