HSS conical and deburring countersink UGT 90° dia. 6.3 mm shank dia. 5 mm DIN 335 C with unequal pitch

Technical information

HSS conical and deburring countersink UGT 90° dia. 6.3 mm shank dia. 5 mm DIN 335 C with unequal pitch

Angle: 90 °
Dia. shank: 0,197 Inch
Dia. shank: 5 mm
Diameter: 0,348 Inch
Diameter: 6.3 mm
Overall length: 1,771 Inch
Overall length: 45 mm
RPM, grey cast iron, white cast iron: 530 - 530 RPM
RPM, rust and acid-resistant steels: 530 - 800 RPM
RPM, soft non-ferrous metals: 800 - 1.060 RPM
RPM, steels up to 220 HV (95 HB): 800 - 1.060 RPM
Version: HSS UGT
Packaging unit: 1 piece

Description

Conical countersinks from PFERD TOOLS are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds.

High-performance tools with a countersink angle of 90° for countersinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results.

Advantages

Very high stock removal rate and optimal chip removal.
Bur-free results even at low cutting speeds.
Durable.
High workpiece surface quality.
Smooth running.
Low countersinking force is needed to create a high quality surface finish.
Specially developed geometry with open flutes for optimum chip removal and heat dissipation.

Recommendations for use

Use cutting oil or compressed air as a coolant/lubricant.
Ideal for producing precise countersinks.

Materials that can be worked: Aluminum; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Chipboard; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Countersinking

Drive types: Column drill; Power drill; Robot; Stationary machines; Tool machine

Downloads

UGT HSS DIN 335 C90

HSS conical and deburring countersink UGT 90° dia. 6.3 mm shank dia. 5 mm DIN 335 C with unequal pitch

UGT HSS DIN 335 C90° 6,3

Included in

PFERD TOOLS Newsletter subscription