Universal solid carbide end mill with five flutes UCD5, radius corner design with chip dividers, 5xD – metric

1mm Radiused End Mill with Chip Breakers, 5 flutes, 20mm Dia, 100mm APMX, 165mm OAL, Weldon shank, Universal

SCM-UCD5-M200R10-XXL165HB AP40

Item number:: 23000878
EAN:: 4007220764688

1mm Radiused End Mill with Chip Breakers, 5 flutes, 20mm Dia, 100mm APMX, 165mm OAL, Weldon shank, Universal 1

1mm Radiused End Mill with Chip Breakers, 5 flutes, 20mm Dia, 100mm APMX, 165mm OAL, Weldon shank, Universal Youtube

Technical data Change variant

PFERD TOOLS worldwide

Technical information

1mm Radiused End Mill with Chip Breakers, 5 flutes, 20mm Dia, 100mm APMX, 165mm OAL, Weldon shank, Universal

Chip divider IEP: yes
Corner radius RE: 0.039 Inch
Corner radius RE: 1 mm
Corner type: Radius corner design
Cutting diameter DC: 0.787 Inch
Cutting diameter DC: 20 mm
Cutting edge count ZEFP: 5 pcs.
Depth of cut maximum APMX: 3.937 Inch
Depth of cut maximum APMX: 100 mm
Feed direction: x,y
Functional length LF: 6.496 Inch
Functional length LF: 165 mm
Helix angles: 38°
Internal coolant: no
Neck diameter DN: 0.772 Inch
Neck diameter DN: 19.6 mm
Regulatory: Company standard
Shank diameter DCON: 0.787 Inch
Shank diameter DCON: 20 mm
Shank type: HB (DIN6535)
Tolerance for shank diameter TCDCON: h5
Usable length LU: 4.331 Inch
Usable length LU: 110 mm
Packaging unit: 1 piece

Cutting Data Calculator

The use of optimum cutting data is a key success factor for productive milling and drilling processes. Our cutting data calculator has an intuitive user interface, enabling you to quickly and easily calculate the machining parameters you need for your application and the material you are working on.

Unit of measurement

Machining

Material

Radial depth of cut (a_e)

Axial depth of cut (a_p)

Results

Description

The solid carbide end mills are designed for universal use on a variety of materials.

Mills with chip dividers for dynamic machining and trochoidal milling.

Special features

Universal use on the most common materials.
High productivity due to optimum stock removal rate.
State-of-the-art coatings.
Optimum chip control due to chip divider.
Variable pitch for low-vibration machining with smooth milling.
Neck chip channel.

Recommendations for use

Observe the recommended cutting data.
Ensure stable workpiece and tool clamping to achieve best performance.

Materials that can be worked: Aluminum; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Ductile cast iron; Ferrite (magnetic material); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; Tough aluminium alloys