Wheel brushes crimped, encapsulated shank-mounted

Item number:: 43507501
EAN:: 4007220220955

Technical data

PFERD Worldwide

Technical information

Dia. external: 2-1/2 Inch
Dia. external: 63 mm
Dia. filament material: .012 Inch
Dia. filament material: 0.3 mm
Dia. shank: 1/4 Inch
Dia. shank: 6 mm
Filament material: Steel wire (ST)
Max. RPM: 15000 RPM
Mounting system: Shank
Overall length: 1-9/16
Overall length: 40 mm
RPM, optimum, from: 7500 RPM
RPM, optimum, to: 11300 RPM
Trim length: 3/4 Inch
Trim length: 20 mm
Width: 1/4 Inch
Width: 7 mm
Packaging unit: 1 piece

Description

Extremely aggressive brushing action, ideal for heavy-duty brushing.

Wire is bonded in a synthetic elastomer material which firmly supports the wire filaments, providing precisely controlled brush face, longer brush life and very aggressive removal rates. Limited flexibility.

Brushes with encapsulated steel wire are available in different hardness grades.

For general use. Aggressive enough for most applications.

This brush is made with brass-plated steel wire. Color: green.

Advantages

Precise handling due to high dimensional stability.
Maximum service life as premature wire breakage is prevented.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Materials that can be worked: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes crimped, encapsulated shank-mounted

PFERD Newsletter subscription