Wheel brushes crimped for burnishing machines, with hole

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive

WBU 100100/19,1 INOX 0,20

Item number:: 43509003
EAN:: 4007220773079

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive 1

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive 2

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive 3

Technical data Change variant

PFERD Worldwide

Choose options

Dia. external

4 Inch

Dia. filament material

.008 Inch .050 Inch

Filament material

Silicon carbide (SiC) Stainless steel wire (INOX) Steel wire (LIT ST)

Reset Filter

Technical information

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive

Dia. external: 4 Inch
Dia. external: 100 mm
Dia. filament material: .008 Inch
Dia. filament material: 0.2 mm
Dia. hole: 3/4 Inch
Dia. hole: 19.1 mm
EDP number: 81331
Filament material: Stainless steel wire (INOX)
Mounting system: center hole
RPM, max.: 6000 RPM
Trim length: 1 Inch
Trim length: 26 mm
Width: 4 Inch
Width: 100 mm
Packaging unit: 1 piece

Description

Excellent for surface structuring work on large workpieces.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Advantages

Can be used on all common burnishing machines due to keyed arbor hole.
Very corrosion-resistant.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Materials that can be worked: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Drive spindle; Drum grinders

Downloads

Wheel brushes crimped for burnishing machines, with hole

Drum Brush 4" Dia x 4" Wide .008 Stainless Steel 3/4" Square Drive

WBU 100100/19,1 INOX 0,20

PFERD Newsletter subscription