RBUIT 5015/6 SIC 180 0.90 KS

Technical information

Dia. external: 2 Inch
Dia. external: 50 mm
Dia. filament material: .035 Inch
Dia. filament material: 0.9 mm
Dia. shank: 6 mm
Dia. shank: 6 mm
Filament material: Silicon carbide (SiC)
Grit size: 180
Max. RPM: 15000 RPM
Mounting system: Shank
Overall length: 2 Inch
Overall length: 50 mm
Packaging: Industrial packaging
RPM, optimum: 6000 - 9800 RPM
Trim length: 1/2 Inch
Trim length: 13 mm
Width: 5/8 Inch
Width: 15 mm
Packaging unit: 10 pieces

Description

Designed for cleaning, deburring, and removing heat discoloration.

In addition to brushes with a stainless steel filament, PFERD TOOLS also offers brushes of the INOX-TOTAL type for work on stainless steel (INOX). It is particularly well suited to use in critical environments.

Advantages

Maximum protection against corrosion as all components are produced from stainless steel (INOX) of quality 1.4310/1.4301 (V2A).
Highly flexible, enabling optimal adaptation to the workpiece contour.
Plastic side plate prevents damage and contamination in the event of workpiece contact.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Materials that can be worked: Aluminum; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Flexible shaft drive; Power drill; Straight grinder

Downloads

Wheel brushes crimped INOX-TOTAL, shank-mounted

RBUIT 5015/6 SIC 180 0.90 KS

PFERD TOOLS Newsletter subscription