Composite disc brushes crimped COMPOSITE, with bridle, with internal thread

COMPOSITE composite disc brush DBUR dia. 75 mm M14 SiC filament dia. 1.10 mm grit 80 stationary

DBUR 75/M14 SiC 80 1,10

Item number:: 43400004
EAN:: 4007220899380

COMPOSITE composite disc brush DBUR dia. 75 mm M14 SiC filament dia. 1.10 mm grit 80 stationary 1

COMPOSITE composite disc brush DBUR dia. 75 mm M14 SiC filament dia. 1.10 mm grit 80 stationary 2

COMPOSITE composite disc brush DBUR dia. 75 mm M14 SiC filament dia. 1.10 mm grit 80 stationary 3

Technical data

PFERD TOOLS worldwide

Technical information

COMPOSITE composite disc brush DBUR dia. 75 mm M14 SiC filament dia. 1.10 mm grit 80 stationary

Dia. external: 3 Inch
Dia. external: 75 mm
Dia. filament material: .040 Inch
Dia. filament material: 1.1 mm
Dia. thread: M14x2
Filament material: Silicon carbide (SiC)
Grit size: 80
Length, filament to ring: 3/4 Inch
Length, filament to ring: 19 mm
Max. RPM: 6000 RPM
Mounting system: Thread
RPM, optimum: 2400 - 3900 RPM
Trim length: 1-1/2 Inch
Trim length: 38 mm
Packaging unit: 1 piece

Description

Particularly aggressive brush with bridle. Ideal for deburring and work on surfaces on stationary machines.

Composite brushes from PFERD TOOLS have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable mounting options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labour-intensive, manual work is reduced and repeatable results are achieved with short cycle times.

Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement.

Plastic filaments are temperature-resistant up to 410°F.

Special features

Long tool life and aggressive brushing action due to the high filament density.
Extremely smooth operation due to evenly distributed filament material.
The bridle prevents the wires spreading out sideways.
The bridle enables the spreading out and flexibility of the brush filament to be controlled.
If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behavior.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Recommendations for use

Please observe the recommended rotational speeds.
Remove the bridle once the filament is worn down. Then the rest of the filament can be used.
Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas.
This brush is designed for use on variable speed angle grinders.
Use coolant for applications where large amounts of heat are produced.

Materials that can be worked: Aluminum; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Angle grinder; Automated centers; Drive spindle; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 11/58 RS PGAS 11/58 RS

Composite disc brushes crimped COMPOSITE, with bridle, with internal thread

COMPOSITE composite disc brush DBUR dia. 75 mm M14 SiC filament dia. 1.10 mm grit 80 stationary

DBUR 75/M14 SiC 80 1,10

Matching tool drive

PFERD TOOLS Newsletter subscription