Diamond grinding discs CC-GRIND® SOLID DIAMOND

CC-GRIND-SOLID DIAMOND 115x22.23 mm D427 (coarse) for work on hard materials

Item number:: 36611542
EAN:: 4007220068342

CC-GRIND-SOLID DIAMOND 115x22.23 mm D427 (coarse) for work on hard materials 2

CC-GRIND-SOLID DIAMOND 115x22.23 mm D427 (coarse) for work on hard materials 3

CC-GRIND-SOLID DIAMOND 115x22.23 mm D427 (coarse) for work on hard materials 4

CC-GRIND-SOLID DIAMOND 115x22.23 mm D427 (coarse) for work on hard materials 5

Technical data Change variant

PFERD Worldwide

Choose options

Dia. external

4-1/2 5

Grit size

D 427 D 852

Reset Filter

Matching accessories & spare parts

Clamping flange for CC-GRIND grinding discs SFS CC-GRIND 115/125 5/8"

Technical information

CC-GRIND-SOLID DIAMOND 115x22.23 mm D427 (coarse) for work on hard materials

Dia. external: 4-1/2
Dia. external: 4-1/2 Inch
Dia. external: 115 mm
Dia. hole: 7/8 Inch
Dia. hole: 22.23 mm
Grit size: D 427
Max. RPM: 13300 RPM
Packaging unit: 1 piece

Description

The CC-GRIND®-SOLID-DIAMOND has been specially developed for applications on hard materials which cannot be machined with conventional tools made of aluminum oxide or silicon carbide.

The CC-GRIND®-SOLID-DIAMOND is used for both wet and dry grinding.

Recommendations for use

Only use the face of the disc, not suitable for peripheral grinding (on edge).
To extend the service life of the grinding disc on scale and wear-resistant coatings, reduce the cutting speed of the speed-adjustable angle grinder to 30 to 40 m/s.
For the best results, use with the CC-GRIND®-SOLID/FLEX clamping flange set.
When used on angle grinders with a 5/8-11 thread, the matching clamping flange set must be ordered separately.

Ordering notes

Customer-specific made-to-order solutions are available on request.

Contents

Matching clamping flange set (M14 thread) is included.

Materials that can be worked: Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Nickel or titanium-based superalloys; Scale; Technical ceramics; Tungsten carbide; Wear-resistant coatings (powder metal alloys and hardfacing alloys)

Applications: Deburring; Descaling; Grinding out; Leveling; Removing oxide layers; Roughening; Rounding; Surface work; Trimming; Working on edges; Working on edges (chamfering, rounding); Work on weld seams

Drive types: Angle grinder; Drive spindle; Robot

PFERDVALUE

PFERDEFFICIENCY

recommends the CC-GRIND®-SOLID-DIAMOND diamond grinding disc for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.