End brushes crimped long, shank-mounted

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.30

Item number:: 43216006
EAN:: 4007220659229

Technical data Change variant

PFERD Worldwide

Choose options

Dia. external

10 mm

Dia. filament material

0.2 mm 0.3 mm

Filament material

Stainless steel wire (INOX) Steel wire (ST)

Reset Filter

Technical information

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.30

Dia. cup: 3/8 Inch
Dia. cup: 10 mm
Dia. external: 3/8 Inch
Dia. external: 10 mm
Dia. filament material: .012 Inch
Dia. filament material: 0.3 mm
Dia. shank: 1/4 Inch
Dia. shank: 6 mm
Filament material: Stainless steel wire (INOX)
Max. RPM: 20000 RPM
Mounting system: Shank
Overall length: 4-3/4 Inch
Overall length: 120 mm
RPM, optimum, from: 3500 RPM
RPM, optimum, to: 9000 RPM
Trim length: 3/4 Inch
Trim length: 20 mm
Packaging unit: 10 pieces

Description

Designed for light brushing such as deburring, cleaning and derusting. Uniquely long length to access deep areas.

End brush with plastic-covered brush body.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

End brush with plastic-covered brush body. Temperature-resistant up to 800°F.

Advantages

Creates fine surfaces.
The plastic covering prevents the risk of corrosion.
Very corrosion-resistant.
The brush is degreased and does not leave any oil residue on the workpiece.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Materials that can be worked: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Drive types: Drive spindle; Flexible shaft drive; Power drill; Straight grinder

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/52 RS PGAS 4/52 RS

Robot spindles for stationary application PWAS 4/52 RS PWAS 4/52 RS

End brushes crimped long, shank-mounted

long end brush crimped PBUL dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.30

Matching tool drive

PFERD Newsletter subscription