Flexible shaft BW 4 replacement core SE 4 DIN10/G16 1.3M

Item number:: 86200305
EAN:: 4007220427705

Technical data

PFERD Worldwide

Technical information

Flexible shaft BW 4 replacement core SE 4 DIN10/G16 1.3M

Dia. drive-side coupling: M10
Dia. drive-side coupling: M10
Dia. external: 3/16
Dia. external: 4 mm
Drive-side coupling, DIN: 10
EDP no.: 94854
Handpiece-side coupling G: 16
Handpiece-side coupling dia.: 0.14/0.1 Inch
Handpiece-side coupling dia.: 3,5/2,45
Handpiece-side coupling dia.: 3.5 mm
Height: 0.16 Inch
Height: 4 mm
Length: 52
Length: 1329 mm
Net weight: 0.12 kg
PFERD type: SE 4 DIN10/G16
Rotational speed range, from: 18000 RPM
Rotational speed range, to: 40000 RPM
Width: 0.16 Inch
Width: 4 mm
Packaging unit: 1 piece

Description

Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).

The flexible core is made of four to ten layers of wire, conforming to DIN 2076, and is specially designed for high-speed clockwise rotation. The coupling is securely press-fitted to the core. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. The flexible casing consists of oil-resistant rubber with a flat steel spiral interior and a solid rubber exterior. The connection couplings are pressed on firmly and encased in a rubber sheath as reinforcement. The handpieces are light and easy to handle and cover a wide rotational speed range. Because of low noise emissions, continuous operation with little fatigue is possible. Replaceable collets or the special shank mounting for morse cones allow various products to be mounted. The sliding coupling enables quick handpiece changes.

Recommendations for use

The rotational speed and power output must stay within their specified ranges.
It is not possible to repair cores and flexible casings. We recommend replacement with pre-assembled new parts.
When using flexible shafts, please ensure that the shafts are not bent beyond the specified radius of curvature. The smallest possible radius of curvature is given for each flexible shaft.

Ordering notes

Special lengths available on request.
Cores and hoses with double-sided sliding coupling on request.

Downloads

Flexible shaft BW 4 replacement core SE 4 DIN10/G16 1.3M

Flexible shaft BW 4 replacement core SE 4 DIN10/G16 1.3M

PFERD Newsletter subscription