High-performance tungsten carbide burs, MICRO cut, Cylindrical with end cut - Shape B

Tungsten carbide high-performance burr MICRO cylindrical ZYAS end dia. 06x16mm shank dia. 6mm finishing

Item number:: 21100276
EAN:: 4007220895566

Tungsten carbide high-performance burr MICRO cylindrical ZYAS end dia. 06x16mm shank dia. 6mm finishing 2

Tungsten carbide high-performance burr MICRO cylindrical ZYAS end dia. 06x16mm shank dia. 6mm finishing 3

Tungsten carbide high-performance burr MICRO cylindrical ZYAS end dia. 06x16mm shank dia. 6mm finishing Youtube

Technical data

PFERD Worldwide

Technical information

Tungsten carbide high-performance burr MICRO cylindrical ZYAS end dia. 06x16mm shank dia. 6mm finishing

Cut: MICRO
Dia. external: 0,236 Inch
Dia. external: 6 mm
Dia. shank: 0,236 Inch
Dia. shank: 6 mm
Length, cut: 0,63 Inch
Length, cut: 16 mm
Overall length: 2,165 Inch
Overall length: 55 mm
RPM from, grey cast iron, white cast iron: 32000 RPM
RPM from, hard non-ferrous metals: 24000 RPM
RPM from, hardened, heat-treated steels over 370 HV (38 HRC): 24000 RPM
RPM from, high-temperature-resistant materials: 24000 RPM
RPM from, rust and acid-resistant steels: 24000 RPM
RPM from, steels up to 370 HV (38 HRC): 32000 RPM
RPM to, grey cast iron, white cast iron: 40000 RPM
RPM to, hard non-ferrous metals: 32000 RPM
RPM to, hardened, heat-treated steels over 370 HV (38 HRC): 32000 RPM
RPM to, high-temperature-resistant materials: 32000 RPM
RPM to, rust and acid-resistant steels: 32000 RPM
RPM to, steels up to 370 HV (38 HRC): 40000 RPM
Packaging unit: 1 piece

Description

MICRO cut tungsten carbide burs are specifically designed for finishing and are used in areas where mounted points are often used. They offer a higher stock removal rate and produce a high surface quality, particularly when compared to conventional double cut burs. MICRO cut burs also operate with low vibration and little noise, they maintain their geometry over their entire service life, and they work in both manual and machine applications. MICRO cut burs can machine almost all materials up to a hardness of 940 HV (68 HRC).

Cylindrical bur with end cut, shape B.

Advantages

High surface quality.
In comparison to abrasive mounted points, there is no change in geometry due to wear and tear.
Work on almost all materials up to 940 HV (68 HRC).
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Ideal for finishing, very fine cleaning work, corrections in tool and mold construction, and for sharpening cutting tools.
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends MICRO cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERDERGONOMICS

recommends MICRO cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

High-performance tungsten carbide burs, MICRO cut, Cylindrical with end cut - Shape B

Tungsten carbide high-performance burr MICRO cylindrical ZYAS end dia. 06x16mm shank dia. 6mm finishing

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription