High-performance tungsten carbide burs, OMNI double cut, 14° Taper bur with radius end – Shape L

Carbide Bur SL-3 14° Taper OMNI Double Cut 3/8" x 17/16" x 1/4" Shank

Item number:: 21728003
EAN:: 4007220140642

Carbide Bur SL-3 14° Taper OMNI Double Cut 3/8" x 17/16" x 1/4" Shank 2

Carbide Bur SL-3 14° Taper OMNI Double Cut 3/8" x 17/16" x 1/4" Shank Youtube

Technical data

PFERD Worldwide

Technical information

Carbide Bur SL-3 14° Taper OMNI Double Cut 3/8" x 17/16" x 1/4" Shank

Angle: 16 °
Cut: OMNI
Dia. external: 3/8 Inch
Dia. external: 9.5 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 28003
Length, cut: 1-1/16 Inch
Length, cut: 26.9 mm
Overall length: 3 Inch
Overall length: 76.2 mm
RPM from, grey cast iron, white cast iron: 14000 RPM
RPM from, hard non-ferrous metals: 14000 RPM
RPM from, hardened, heat-treated steels over 370 HV (38 HRC): 8000 RPM
RPM from, rust and acid-resistant steels: 14000 RPM
RPM from, soft non-ferrous metals: 14000 RPM
RPM from, steels up to 370 HV (38 HRC): 14000 RPM
RPM to, grey cast iron, white cast iron: 29000 RPM
RPM to, hard non-ferrous metals: 19000 RPM
RPM to, hardened, heat-treated steels over 370 HV (38 HRC): 14000 RPM
RPM to, rust and acid-resistant steels: 19000 RPM
RPM to, soft non-ferrous metals: 24000 RPM
RPM to, steels up to 370 HV (38 HRC): 24000 RPM
Radius: 0.114 Inch
Radius: 2.89 mm
SCTI-No.: SL-3
Packaging unit: 1 piece

Description

With the innovative OMNI cut, PFERD has developed unique burs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The OMNI cut offers all the benefits of the tried-and-tested double cut, but its stock removal rate is up to 30% higher for steel. It enables comfortable working with reduced vibration and less noise. The OMNI cut also offers significant time savings and a high economic value.

14° Taper bur with round radius end, shape L.

Advantages

Significantly better stock removal rate than conventional double cut burs.
Saves time and money with very high stock removal rate on key materials.
Comfortable working due to reduced vibration and noise.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Safety notes

Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; Soft non-ferrous metal; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; White annealed cast iron (GTW, GJMW); Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends OMNI cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERDERGONOMICS

recommends OMNI cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

High-performance tungsten carbide burs, OMNI double cut, 14° Taper bur with radius end – Shape L

Carbide Bur SL-3 14° Taper OMNI Double Cut 3/8" x 17/16" x 1/4" Shank

PFERDEFFICIENCY

PFERDERGONOMICS

PFERD Newsletter subscription