HSS hole saw set for mechanics

Bi-Metal Hole Saw Kit 13 Pieces

Item number:: 25901300
EAN:: 4007220319352

Technical data

PFERD Worldwide

This set contains

Technical information

Bi-Metal Hole Saw Kit 13 Pieces

EDP no.: 29180
Height: 3-5/32 Inch
Height: 80 mm
Length: 12-13/64
Length: 310 mm
PFERD type: LS-SO 13 M
Width: 10-1/4 Inch
Width: 260 mm
Packaging unit: 1 piece

Description

The set contains nine bi-metal hole saws in the most common diameters, including accessories, for mechanics in the construction, container, and pipeline industries. It comes in a well-arranged plastic box which protects against dirt and damage. Operating instructions are included. It is possible to use hole saw EDPs 29113 and 29115 with the adapter and washer, EDP 29070.

Advantages

Cost-effective sawing of round cut-outs.
Alternating tooth pitch prevents chattering during sawing.
High concentricity.
Good chip removal.
The hole saw is conveniently centered and guided via the replaceable bi-metal pilot drill.
Hole saw arbor comes with an ejection spring for improved ejection of the cut material.

Recommendations for use

Observe the recommended rotational speed.
Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 1/8" over the teeth of the hole saw."
When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminum, use kerosene instead of cutting oil.
Bi-metal hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles that develop from the workpiece during work. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing.
Avoid overheating the saw.

Safety notes

When using shank extensions, the recommended hole saw rotational speed must not be exceeded in order to prevent accidents.

Contents

The Allen key and the ejection spring are only available in a set and not individually.

Materials that can be worked: Aluminum; Hard non-ferrous metal; Plastics; Stainless steel (INOX); Steel, cast steel

Applications: Cutting out holes; Drilling

Drive types: Column drill; Power drill

Downloads

HSS hole saw set for mechanics

Bi-Metal Hole Saw Kit 13 Pieces

This set contains

PFERD Newsletter subscription