HSS step drill, HICOAT coating

Step drill HSS 9 drilling steps dia. 4-20 mm 3-surface shaft dia. 8 mm HICOAT coated

Item number:: 25201042
EAN:: 4007220802755

Step drill HSS 9 drilling steps dia. 4-20 mm 3-surface shaft dia. 8 mm HICOAT coated 2

Technical data Change variant

PFERD Worldwide

Technical information

Step drill HSS 9 drilling steps dia. 4-20 mm 3-surface shaft dia. 8 mm HICOAT coated

Dia. shank: 5/16 Inch
Dia. shank: 8 mm
Drilling range, from: 0,157 Inch
Drilling range, from: 4 mm
Drilling range, to: 0,787 Inch
Drilling range, to: 20 mm
Number, drill steps: 9 pcs.
Overall length: 2,953 Inch
Overall length: 75 mm
RPM from, rust and acid-resistant steels: 160 RPM
RPM from, soft non-ferrous metals: 320 RPM
RPM from, steels over 220 HV (95 HB): 160 RPM
RPM from, steels up to 220 HV (95 HB): 320 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 160 RPM
RPM to, rust and acid-resistant steels: 1600 RPM
RPM to, soft non-ferrous metals: 2400 RPM
RPM to, steels over 220 HV (95 HB): 1600 RPM
RPM to, steels up to 220 HV (95 HB): 2400 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 1600 RPM
Version: HC-FEP
Packaging unit: 1 piece

Description

HSS step drills for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft. HSS step drills with premium HICOAT® coating HC-FEP are wear resistant and versatile as they can be used to process steel, stainless steel (INOX), non-ferrous metals, thermoplastics and duroplastics. Step drills with HICOAT® coating HC-FEP provide good high-temperature hardness and resistance to oxidation. They can therefore also be used on hard materials without the addition of coolants.

Advantages

Drilling and deburring in a single step.
Completely smooth running and a high cutting performance.
The high-quality drill tip ensures easy centering and drilling.
The tool taper makes it easier to pull back from drilled plates.
Long and solid chips are quickly and easily removed similar to the chip produced by a spiral drill.
Built-up edges and cold welding on the blades are prevented.

Recommendations for use

Use HSS step drills on sheets, pipes and profiles with a maximum thickness of 4 mm.
Step drills with a HICOAT® coating can also be used without the addition of coolants.
Step drills with a HICOAT® coating are ideal for use on stainless steel (INOX).

Materials that can be worked: Aluminum; Brass; Bronze; Case-hardened steels; Cast steel; Chipboard; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Hard aluminium alloys; Hard non-ferrous metal; Hardwood; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; Wood; Zinc

Applications: Countersinking; Deburring; Drilling

Drive types: Column drill; Power drill

Downloads

Included in

HSS step drill set HICOAT SET STB HSS HC-FEP 3TLG

HSS step drill, HICOAT coating

Step drill HSS 9 drilling steps dia. 4-20 mm 3-surface shaft dia. 8 mm HICOAT coated

Included in

PFERD Newsletter subscription