Copy of es_MX: Broca espiral INOX Ø 2,9 mm HSS-E Co5 N DIN 338 135° para materiales duros y resistentes

Technical information

Angle: 135 °
Diameter: 7/64 Inch
Diameter: 2.9 mm
Flute length: 1-2/7 Inch
Flute length: 33 mm
Overall length: 2-2/5
Overall length: 61 mm
PFERD type: SPB DIN338 HSSE N 2,9 INOX
RPM from, grey cast iron, white cast iron: 1100 RPM
RPM from, hard non-ferrous metals: 2750 RPM
RPM from, rust and acid-resistant steels: 1100 RPM
RPM from, soft non-ferrous metals: 3300 RPM
RPM from, steels over 220 HV (95 HB): 2200 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 1650 RPM
RPM to, grey cast iron, white cast iron: 2750 RPM
RPM to, hard non-ferrous metals: 5500 RPM
RPM to, rust and acid-resistant steels: 2200 RPM
RPM to, soft non-ferrous metals: 6590 RPM
RPM to, steels over 220 HV (95 HB): 2745 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 4400 RPM
Spiral angle, from: 36 °
Version: INOX
Packaging unit: 10 pieces

Description

Drill bits with cross grinding for industrial use. Fully ground, right-hand turning to produce precise drill holes due to their high concentricity and exact centering. PFERD offers spiral drills STEEL (118 ° point angle) and INOX (135 ° point angle) versions.

High-performance HSSE-Co5 (M35) drill bit for industrial use on INOX and other non-ferrous metals. The fully ground right-hand turning design with cross grinding provides an exact centering drill tip and a high level of concentricity.

Advantages

Very good chip removal.
High concentricity.
Exact centering and low feed force thanks to cross grinding.
Ideal for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX).
Robust tip profile.
Very durable.
Very good temperature resistance due to Co content.

Recommendations for use

Observe the recommended rotational speed.
When drilling metals, use a high-quality cutting oil or cooling lubricant, if possible. This facilitates smooth running and extends the drill service life. Exception: when working on aluminum, use kerosene instead of cutting oil.
To avoid corrosion when working on stainless steel (INOX), remove any particles that break away from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).

Safety notes

Wear eye protection!
Follow the safety instructions!

Materials that can be worked: Aluminum; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Casting scale; Casting scale with sand contamination and metal contamination; Cast iron; Cast steel; Chipboard; Cobalt-based alloys; Copper; Ductile cast iron; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hard non-ferrous metal; Hardwood; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other; Other non-ferrous metals; Plastics; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Drilling

Drive types: Column drill; Power drill; Robot; Stationary machines; Tool machine

Downloads

HSS twist drill bits, HSSE N INOX

PFERD Newsletter subscription